Many thanks Dave,
All noted with interest and I should have no trouble now.
I saw your CQ on DFCW last night, must have been about 8 'ish.
I was tweaking my new RX and you were of course a colossal signal.
73 Chris G3XIZ
-----Original Message-----
From: Dave G3WCB [mailto:[email protected]]
Sent: 22 September 2005 09:12:PM
To: [email protected]
Subject: LF: RE: DFCW
Hi, Chris.
I use the program "QRS v4.02" from ON7YD to send both QRSS amd DFCW. It's
very easy to use and configure, and you can do useful things like alter the
inter-character spacings, flip DFCW mark and space, etc. You need to build a
1-transistor interface/level shifter to key the transmitter, but the circuit
is contained in the "Help" documentation that comes with the program.
http://www.qsl.net/on7yd/software_main.htm
If you can't get enough swing with a vari-cap, you can use a 1N918 or 1N4148
Si diode as a switch, and use it to switch a trimmer capacitor across the
crystal. I use a crystal in the 3MHz range in a Colpitts configuration, and
the DFCW control signal switches a 3-30 pF trimmer across the crystal. For
DFCW3 speeds, about 3 or 4 Hz shift is all you need. If you go to DFCW10 or
longer, you need only about 1 Hz or less shift.
The convention seems to be that the dash is the higher frequency.
73 Dave G3WCB IO1RM
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of OSBORN, Chris
Sent: 22 September 2005 13:57
To: LF Group (E-mail)
Subject: LF: DFCW
My new LF TX is nearly finished and I would like to add the option
of DFCW.
I was thinking of just placing a varicap diode in parallel with the
crystal and thus pulling the frequency
for achieving the dots / dashes.
Can someone direct me to a circuit diagram and software to achieve
this ?
73 Chris G3XIZ
This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or
otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or
obligation.
EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England
|
