Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: Where to get TC44... and MUR1660??

from [Rik Strobbe] [Permanent Link][Original]
To: [email protected]
Subject: Re: LF: Where to get TC44... and MUR1660??
From: "Rik Strobbe" <[email protected]>
Date: Tue, 20 Jan 2004 09:08:33 +0100
In-reply-to: <00a901c3ded7$9c359cc0$2102000a@ibm>
References: <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: <[email protected]>
Dick,

they have all the TC44xx drivers at Farnell.
Be aware that the TC4421/22 are 9 Amp. versions and rather expensive (arround 10 Euro) while the TC4426/27 are 1.5 Amp. versions and cost less than 2 Euro.
The 1.5 Amp. version can drive a couple of FET's without any problem.

You can reach Farnell : 73, Rik  ON7YD

At 22:59 19/01/2004 +0100, you wrote:
Hello all,

I am wondering where I can get (one of) the following components:

TC4421
TC4422
TC4426
MUR1660CT

A google search didn't deliver a resonable result.
I am looking for a store/firm in Holland or Germany, as this is
the easiest way in case of ordering/paying.

Any suggestions??

Meanwhile I started to build the first part for my 136kHz station:
the 1370kHz VFO..........
The rest will be a lot of bits and pieces from various designs, likely
resulting in a QRPP transmitter capable of producing 100Watt or so.

73

Dick, PA4VHF (JO32eh)
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  LF: Re: Where to get TC44... and MUR1660??, Andy talbot
Next by Date:  LF: Brian...another "bounce", Alan Melia
Previous by Thread:  LF: Re: Where to get TC44... and MUR1660??, Andy talbot
Next by Thread:  Re: LF: Where to get TC44... and MUR1660??, dj9dw
Indexes:  [Date] [Thread] [Top] [All Lists]