Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Jason V0.92

To: [email protected]
Subject: LF: Jason V0.92
From: "Alberto di Bene" <[email protected]>
Date: Sun, 20 Jan 2002 17:30:56 +0100
Organization: None
References: <[email protected]>
Reply-to: [email protected]
Sender: <[email protected]>
I have just uploaded version 0.92 of Jason to
http://www.weaksignals.com/jason

Qsl.net seems to be again up to speed, so
downloading  should be easy.

The mods are :

- Ctrl-Z clears the reception screen
- The blooming of the waterfall trace has been fixed.
- There should be now much less garbled and repeated
  characters when receiving just noise
- The new 17-tone signalling scheme is implemented
- When using audio output, it is possible to apply a multiplying
  factor to the steps between the tones
- A beacon mode is implemented
- Selectable USB/LSB both for Rx and Tx

Regarding this last point, a few notes are in order :

On the transmitting side, the Tx and Jason must be set both
either on USB or LSB. There is no need to announce in advance
which mode the transmission will be, as long as the above
rule is adhered to.

The same holds for the receiving side. Keep both the Rx and Jason
either on USB or LSB, irrespective on how the setting is on the
transmitting side.

A last word about the beacon mode.
The text to be beaconed must be surrounded by braces :  {   }
When the opening brace is encountered, then the text found until
the closing brace is endlessly repeated.  As an example, suppose
the following is typed :

HELLO ALL { THIS IS A TEST}

What will be transmitted is:

HELLO ALL THIS IS A TEST THIS IS A TEST THIS IS A TEST.....
and so on.

Any text following the closing brace will be ignored.

As usual, any and all reports are welcome

73  Alberto  I2PHD
P.S. Version 0.92 is, of course, incompatible with 0.9 and 0.91





<Prev in Thread] Current Thread [Next in Thread>