Hello Gary, call the is almost right, locator completely. But not really impressive for 500mW ERP. I could see my signal on your grabber, some slow QSB but strong for the last 2 minutes or so. I used
I think I will stick with CW, the speed is easier to adjust!! de G3KEV Gary, LF, I just had a look at MMTTY and it seems pretty easy to set it to 50Hz shift and 22Bd baudrate. The way I did it: 1. As
Rik, MTTY is set up as you suggested. Waiting your signal now. 73 Gary - G4WGT. --Original Message-- From: [email protected] [mailto:[email protected]] On Behalf Of
Hello Gary, LF, I just had a first transmission. I will try short transmissions every 10-15 minutes or so until my signal shows up un your grabber. Then I will start longer transmissions. 73, Rik ON7
Hello Gary, I had a closer look at the 23Hz shift option of MMTTY and it seems to run at 45Bd what is on the edge regarding the shift/baudrate ratio. That is most likely the reason why it is not so r
Gary, LF, I just had a look at MMTTY and it seems pretty easy to set it to 50Hz shift and 22Bd baudrate. The way I did it: 1. As a start select 23Hz RTTY (in "Profiles") 2. In "Options" select "Setup
Faint traces of my signal are showing up on the G4WGT grabber. I will transmit every 10 minutes starting 20:40 UTC until 21:30 UTC and listen inbetween. 73, Rik ON7YD - OR7T Hello Gary, LF, I just ha
Dear Rik, LF Group, Nil seen here so far... mind you, I still am having local noise problems here. Cheers, Jim Moritz 73 de M0BMU dear all, I will run a short (10 minute) rtty test (23Hz shift) on 50
OK Rik, I will look at the settings you describe in MTTY to allow me to monitor, I normally use TrueTTY. Thanks for the info. Cheers, Gary - G4WGT. --Original Message-- From: owner-rsgb_lf_group@blac
Rik, Looking at fldigi , the MFSK-4 looks to be 100 Hz wide ? may be a little slow, but will print , the MFSK mode is also more robust than OLIVIA. (olivia is showing at 125 Hz Bw minimum) The lower
Hi Rik, You have experienced the same as I did with 23Hz shift, the signal needs to be very strong to decode. It was in the last 2 minutes that I got the partial decode. A much better shift to use is
Hi Rik, This is the best I could do, it looks like almost your call sign & locator RHTQHTST DE TC(TIOJ7T OR1T JO20IX 73 Gary - G4WGT. --Original Message-- From: [email protected] [ma