Graham, LF Thanks for the informative write up of the history of ROS. You've obviously delved a lot further into the mode than the rest of us. For a one-man operation it's a remarkable achievement an
Date: Fri, 2 Sep 2011 19:51:39 +0000 (GMT Standard Time)
LF, One of my objectives listed on my application for a NoV for 500kHz was to assist other UK stations in their own experiments, acting as remote eyes and ears, and it was in this role that I accepte
Ok John Looking on 502-4 now .. what power are you running ? Do you have RX ? G. On Sat, 3 Sep 2011 00:32:54 +0100 "Graham" <[email protected]> wrote: Roger, All ROS HF /MF / Multi access ./ Ho
Graham, John, Looks like the PSK reporter is in <Configure>...<Misc>.....<Spotting>Tab. Gary - G4WGT. On 3 September 2011 15:02, Graham <[email protected]> wrote: Ok John, Running fldigi .
on the psk - reporter map.. same as ros uses ! From: Gary - G4WGT Sent: Saturday, September 03, 2011 4:51 PM To: [email protected] Subject: Re: LF: My thoughts on ROS G... Where do I look
Ok have that .. on line now .. can you send your call Gary , see if it spots you ? G. From: [email protected] Gary - G4WGT Sent: Saturday, September 03, 2011 3:30 PM To: rsgb_lf_grou
Roger, All ROS HF /MF / Multi access ./ How did we get here ? Well as previously, the mode was designed as a low signal data mode optimised for LF/MF , the origins are routed in the early days of the
Ok have that .. on line now .. can you send your call Gary , see if it spots you ? G. From: [email protected] Gary - G4WGT Sent: Saturday, September 03, 2011 3:30 PM To: [email protected]
Ok John, Running fldigi . but cannot see how to set the auto spot to psk-reporter up the button 'spot' is greyed out . don't see mention in the set up's ..must be something Ive missed .. will try a f
Graham, LF Thanks for the informative write up of the history of ROS. You've obviously delved a lot further into the mode than the rest of us. For a one-man operation it's a remarkable achievement an
Graham, I think you need to go to "Configure....misc...spotting" and select some options (I ticked the first two) and then press "Initialize". After that the Spot button should be activated, and when
Roger, All ROS HF /MF / Multi access ./ How did we get here ? Well as previously, the mode was designed as a low signal data mode optimised for LF/MF , the origins are routed in the early days of the
Graham, LF I'm running 100W from the TX. ERP estimate around 500-700mW with a following wind. Yes, I have RX too so will look for any signs of life from south! Cheers, John GM4SLV
Well, I agree with GM4SLV's comments on ROS, although my experience is very limited and RX only so far. I have successfully decoded G0NDB, G4WGT and GM4SLV on 500kHz. Like Mal and John, I also found
