Hi LF, Thanks to Markus & Nicolas for reports & screen shots. I have a little more work on the antenna base loading coil as I can’t tune through the frequency now, need to reduce the coil turns
Hi Chris, LF, Thank you for the report. Gary – G4WGT – IO83QP. From: owner- [email protected] [mailto:owner- [email protected] ] On Behalf Of Chris Sent: 22 April 20
Hi Markus, Jean-Pierre, LF, Thank you for the additional method, I will have a look at that one also. I have just managed to get Argo-upload operational. When I am happy with the grabber I will annou
Mal, You made your views public !! so any answers must be the same. Gary – G4WGT. From: owner- [email protected] [mailto:owner- [email protected] ] On Behalf Of mal Sent:
Hi LF, Just been going thro’ my SpecLab captures which had mounted up, here is one worth showing to the group from the 6th May 2008. 73, Gary - G4WGT - IO83QP. Attachment: DJ8WX.jpg Description
LF, I would like to say a big thank you those who have took time to help me set up the grabber via LF, UK500KHz & direct. It seems to be working fine now. 73, Gary - G4WGT - IO83QP.
Hi LF, Currently testing on 503.600 KHz. QRS 3 & CW ID 12wpm, 5 minute intervals. Modified antenna at 12 mtrs, elevated inductance at 8 mtrs, 1W ERP Tx power 225 watts DC input. LF/MF antenna now bac
Mal, If UK stations who hold an NoV wish to experiment or research in their own way what is wrong with that? If they are operating & experimenting within the terms of the amateur licence & NoV then N
Hi Chris, LF, Seeing & hearing your RTTY but not strong enough for decent copy. I am QRT now for our meal but will look for you later. 73, Gary - G4WGT - IO83QP.
Hi Lubos, LF, Thanks for screen shot. Looks good. Txing for another hour or so. Gary – G4WGT. From: owner- [email protected] [mailto:owner- [email protected] ] On Behalf O
Hi Uwe, The screen grab was timed at 2025utc on 06/05/2008. Gary - G4WGT. --Original Message-- From: [email protected] [mailto:[email protected]] On Behalf Of uwe-ja
Hi LF, I recently wrote to LF regarding setting up a grabber. Well the time has arrived, I would like 500 KHz operators to have a look at my prototype grabber. There is no auto refresh as yet until I
Hi Mark, LF, Just been going thro’ my SpecLab captures which had mounted up, here is one worth showing to the group from the 6th May 2008. 73, Gary - G4WGT - IO83QP. Attachment: GM4ISM.jpg Desc
Hi Chris, LF, Seeing your RTTY (no decode) & just hearing your CW ID at a little after 1800utc. I have stoked up the gear so I will watch the frequency, screen shot attached, your signal amongst the
Peter, LF, I got mine as scrap from a telephone engineer many years ago. I have used it as twin balanced feeder with a HF trap dipole & an inverted V & worked very well. The drop wire I had only had
Hi LF, Thanks to John, Mark & Roman for the suggestions & tips. I will look at the suggested software & make a choice of which to use. I will notify the web address of the grabber if I am successful