Hi Mal,
my 2.4 GHz TX
is fairly improvised and may not be easy to reproduce... I've extracted the LO
from an old Sat-TV receiver, followed by a small Minicircuit amplifier and a 60
cm dish indoors. The PLL consists of the 1/64 prescaler output fed to a CD4030
XOR phase comparator, along with a 18.75082 MHz Rubidium-controlled reference.
There are surely much better ways to generate a
decent 13 cm signal. PA1SDB mentioned that he uses an Adalm-Pluto SDR from
Analog Devices.
You might be able to pick us up on
the web-sdr, using 10489603.5 kHz USB dial, and Opera SW set to Op-05 speed by
selecting e.g. the 1296 MHz band. Yes we could try a crossband contact, but not
today. To count as a valid QSO, we'd probably also need to set up our own
receivers, both for 10.5 GHz and 472 kHz.
Best 73,
Markus
-----Ursprüngliche Mitteilung-----
Von: mal
hamilton <
[email protected]>
An: rsgb_lf_group
<
[email protected]>
Verschickt: So, 3.
Mrz 2019 16:24
Betreff: Re: Not LF: Opera via QO-100