Re: LF: Auto-EbNaut reception on LF in JN80

[Domenico IZ7SLZ <iz7slz.domenico@gmail.com>]

Just to rectify my previous message:

parameters for the decoder are:

15 Characters, 1 s /symbol, 8K19A, list=20000, CRC=16

The actually chosen RX frequency is 137495.000 Hz

the decoder start time is at hour, every hour.

Again,73

Domenico IZ7SLZ

On 4 July 2017 at 11:13, Domenico IZ7SLZ <iz7slz.domenico@gmail.com> wrote:

Dear LF,

since yesterday i'm testing,  on my ubuntu-PC,  a shell script that pipes some vlfrx-tools and ebnaut linux programs.

This script (see attached) permits to achieve an automatic EbNaut decode from the audio coming from my LF receiver. The decoder is setted with these parameters:

16 Characters, 1 s /symbol, 8k19A, list=20000, CRC=16

The actually chosen RX frequency is 137495.000 Hz

So, i invite all of you (within my LF reception range)  to try lo leave a message on this 'grabber' :

http://www.qsl.net/i/iz7slz/EBNAUT/DECODED.TXT

Of course, i'm at disposal to change these settings for any schedule.

These are the programs running on PC:

- vtcard, vttime for manage the audio card and timing;

- gpsd, ntpd for getting utc synchro from GPS (that has nmea + 1pps)

- vtwrite to store the raw audio on HD

- vtread,vtblank,...ebnaut (are launched by the script)

- wput for upload the DETECTED file

This is the occasion to thanks Paul Nicholson for his programs.

OK. Many things need to be improved on this idea. Your suggestions are welcome !

73 and FB summer to all.

Domenico, IZ7SLZ