If Ros puts the MF mode back, then, yes a good idea , otherwise ,
otherwise , all you need to send CW, RTTY and Opera is a divide by 4
[ OR 2 + Class e/d Pa] , from Top-band and a U3 for wspr .... psk is
linear , so that needs a linear pa , which are few and far between on
477 , same go's for olivia , that needs a linear Tx/Rx path ..at the
moment mfsk is about as good as it gets ..
Or just a U3 if beacons' are your thing ...
73-G,
--------------------------------------------------
From: "VIGILANT Luis Fernández" <[email protected]>
Sent: Saturday, January 02, 2016 11:01 AM
To: <[email protected]>
Subject: Re: LF: Nuand TVerter for MF
Hi MF
Mal. May be worth to have a look to the design by VK3XDK
http://www.vk3xdk.net46.net/1_31_600M-472Khz-479Khz-Transverter-V2.html
pdf here
http://www.vk3xdk.net46.net/web_documents/600m_transverterv2.pdf
73 de Luis
EA5DOM
________________________________________
De: [email protected]
[[email protected]] en nombre de Graham
[[email protected]]
Enviado: viernes, 1 de enero de 2016 23:43
Para: [email protected]
Asunto: Re: LF: Nuand TVerter for MF
Looks a nice device Mal, but ...
, DC > 300 MHz
I don't see the full spec , gives me the impression it compliments the
wide band tx/rx
which tops out at $1500
There was a good tx/rx single board sdr demonstrated at the rsgb
convention , uk made , the cut down version was round £200 .. have
to
go back over the events list to pin the name down
73-G,
--------------------------------------------------
From: "Mal Hamilton" <[email protected]>
Sent: Friday, January 01, 2016 9:52 PM
To: <[email protected]>
Subject: LF: Nuand TVerter for MF
MF
Does anyone use the Nuand TVerter
If so is it any good?
73
Mal/g3kev
Sent from my iPhone
|
