Hi Andy and thanks for tip of putting the diode across the gate of
the PA MOSFET in your posting a few months ago.  I'm using the class
E amp at the moment. The XOR can idle with high output so I decoupled it with a cap.

The symbols are 2 seconds.

73 & GL
Joe

On Thu, 26 Nov 2015, Andy Talbot wrote:

Are these transmission using 1s or 2s symbols ?

Missed the 2000 sessin, but I'll record some of the later ones.

Andy


On 26 November 2015 at 19:59, <[email protected]> wrote:

Markus Paul and Domenico, Group

I have new message 5 characters 512 symbols and hopefully corrected
the timing offset a bit.  Will start in 1 minute at 2000 utc
and on the half hour.
Running 50 watts tonight to get some lower Eb/No values.
Its just starting to get dark now.

73
Joe

On Thu, 26 Nov 2015, Domenico IZ7SLZ wrote:

Good day all,

here the results of my decodes. I have used the time offsets indicated by
Markus and Paul (thanks !)  to start searching the sequence. Signal is
very
weak here and there is no possibility to found a peak in his  squared
spectrum.


For last night, there are other positive  decodes under processing now.
Looking initial results, seems that transmitter has  worked with -3 dB at
least.
Is it true, Joe ?

73, Domenico / iz7slz


*time**file**T_init**f_off**t_off**rank**Eb/N0**Es/N0**BER**24.11.2015*21:00
11242112 20:54:58.300-23,00032 303.002,9-8,7   184/60821:30  11242142
21:24:58.300-23,00016  303.5530,3-10,3   203/60822:00  11242212
21:54:58.300-23,00032  305.003,9-7,7   171/60822:30  11242242
22:24:58.300-23,00016
306.204,0-7,6  170/608*25.11.2015*01:00 11260112 00:54:58.300-23,00016
304.8810-8,0-12,4  224/60801:30

11260142
01:24:58.300-23,00016  305.831240,2-11,4

214/608

On 26 November 2015 at 13:14, Markus Vester <[email protected]> wrote:

Unfortunately I went to bed too early and didn't start data saves.

73, Markus

-----Ursprüngliche Mitteilung-----
Von: jcraig <[email protected]>
An: rsgb_lf_group <[email protected]>
Verschickt: Do, 26 Nov 2015 12:46 am
Betreff: LF: More EbNaut 137.777

Hopefully my low power tx will work and the bugs will not bite.

Starting 0000 UTC with same parameters as before.



73

Joe VO1NA