Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: AW: Dual Mode WSPR Beacon running

from [Joe] [Permanent Link][Original]
To: <[email protected]>
Subject: LF: AW: Dual Mode WSPR Beacon running
From: "Joe" <[email protected]>
Date: Mon, 19 Oct 2015 18:53:49 +0200
In-reply-to: <CAA8k23TF-rBXQsNvKa2_PGRx+nd=QM-zu4citbbNpyoVpsnjJw@mail.gmail.com>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AdEKiwdRChsOmX8YQCqZWAaestF1aAAA2jGA

Hi Andy,

 

nice signal here near Dusseldorf but my WSPR2 was not uploading spots.

I made a manual upload now and have restarted WSPr2 should work now.

 

73 Joe

DF2JP

 

Von: owner-[email protected] [mailto:owner-[email protected]] Im Auftrag von Andy Talbot
Gesendet: Montag, 19. Oktober 2015 18:24
An: [email protected]; [email protected]
Betreff: LF: Dual Mode WSPR Beacon running

 

My 137kHz dual mode WSPR beacon is running.  It randomly alternates between WSPR-2 and WSPR-15 mode (shifting frequency appropriately)

 

Two callsigns are in use,  G4JNT on -2 and G8IMR on -15,   this allows differentiation in the WSPR database.   I see there are already spots from both modes in WSPRNet

 

EIRP is about 0.3 Watts

 

As it shifts randomly between modes, there may be an appreciable wait between the faster -2  transmission slots when it is sending -15 and then wating to resync its 2 minute sequence - be patient

 

Andy  G4JNT / G8IMR

 

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: Where to measure antenna current?, John Rabson
Next by Date:  LF: I5TGC in MF-Hell, Joe
Previous by Thread:  LF: Dual Mode WSPR Beacon running, Andy Talbot
Next by Thread:  LF: Re: Dual Mode WSPR Beacon running, Andy Talbot
Indexes:  [Date] [Thread] [Top] [All Lists]