Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Re: Band is open to VK!

To: "[email protected]" <[email protected]>
Subject: Re: LF: Re: Band is open to VK!
From: Mal Hamilton <[email protected]>
Date: Sat, 22 Aug 2015 01:11:09 +0100
In-reply-to: <007b01d0dc56$74c4ff30$6401a8c0@JAYDELL>
References: <[email protected]> <[email protected]> <A7071D422BDA4A209D082183FF6C2221@PCFausto> <[email protected]> <007b01d0dc56$74c4ff30$6401a8c0@JAYDELL>
Reply-to: [email protected]
Sender: [email protected]
Or
Feed some DC up the ant wire to charge drone batteries
G3kev

Sent from my iPhone

On 21 Aug 2015, at 22:15, <[email protected]> wrote:

Maybe rectify some rf to keep the batteries topped off?
 
Jay W1VD  WD2XNS  WE2XGR/2
 
 
----- Original Message -----
Sent: Friday, August 21, 2015 2:31 PM
Subject: Re: LF: Re: Band is open to VK!

Use a quad drone to hold ant wire up
More stable than a kite
De mal/g3kev


Sent from my iPhone

On 21 Aug 2015, at 14:39, "Fausto Coletti" <[email protected]> wrote:

Hi Stefan,
 
It would be interesting try to transmit a robust CW signal on 472 KHz,
eventually with a lambda/4 kite antenna on the saltwater.
It is a bit of time I'm thinking... ;-)
Some years ago I made several QSOs on 160m with VK and ZL from my home
with the same 25m tophat antenna that I use for 630m.
Why not try also on MF ?
 
 
73, Fausto IK4NNMF
 
 
----- Original Message -----
From: DK7FC
Sent: Friday, August 21, 2015 2:26 PM
Subject: LF: Band is open to VK!

Hi LF,

It's time again to try attemps to leave traces in VK. Edgar is running his grabber at https://dl.dropboxusercontent.com/u/101251787/testIDC.html
Starting 18:30 UTC, i will attempt to leave a trace in DFCW-180 there. The best result so far was that: https://dl.dropboxusercontent.com/u/19882028/LF/Dk7FC%20ver%20o%20spec.png
Will someone join in?

73, Stefan

Nessun virus nel messaggio.
Controllato da AVG - www.avg.com
Versione: 2015.0.6125 / Database dei virus: 4392/10477 - Data di rilascio: 21/08/2015

<Prev in Thread] Current Thread [Next in Thread>