http://www.youtube.com/watch?v=YYq8RWt-A4o
:- ,)
--------------------------------------------------
From: "Clemens Paul" <[email protected]>
Sent: Wednesday, March 12, 2014 6:27 PM
To: <[email protected]>
Cc: <[email protected]>
Subject: LF: DK7FC's CW signal on MW
Hello Stefan,
I do hope that your ugly cw signal will not jam nearly the whole 1kHz
segment
from 472kHz to 473kHz next weekend as last sunday evening.
https://dl.dropboxusercontent.com/u/36274675/DK7FC_chirpy.png
https://dl.dropboxusercontent.com/u/36274675/DK7FC.png
Your sideband noise/click spectrum destroyed my qso with DJ6CB when his
signal went below S6 by qsb.
It would be a good idea to clean up your CW signal a lot or if you're not
capable do do this
reduce your power by at least 10dB,then you would be probably closer to 1W
ERP than now..
BTW on sunday evening I heard you mocking ERP regulations in a qso, so you
seem not
to care much about them.
I'm not sure if this is helpful for our MW allocation and
"you can't work them if you can't hear them".
There are examples how a big AND clean signal can look like,e.g. from
DK1IS
(sorry no screenshot).
Also DF5QG's signal is much cleaner than yours even if not optimum.
https://dl.dropboxusercontent.com/u/36274675/DF5QG.png
You could also move to the upper end near 479kHz where you don't disturb
the reception of
other weak cw signals?
You seem a bit to behave on MW like you where alone.
73
Clemens
DL4RAJ
| 
