Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: 29.499 again starts 2200... dial 27.925 kHz

To: "[email protected]" <[email protected]>
Subject: RE: LF: 29.499 again starts 2200... dial 27.925 kHz
From: Bob Raide <[email protected]>
Date: Fri, 7 Mar 2014 16:47:28 -0500
Authentication-results: mx.google.com; spf=neutral (google.com: 195.171.43.25 is neither permitted nor denied by best guess record for domain of [email protected]) smtp.mail=[email protected]
Delivered-to: [email protected]
Importance: Normal
In-reply-to: <871B04C79E3B4D0CBCB4A26D99760AA6@AGB>
References: <[email protected]> <1954431E4AA545A2BE3418D0ECA87E03@White>,<871B04C79E3B4D0CBCB4A26D99760AA6@AGB>
Reply-to: [email protected]
Sender: [email protected]
G;
Markus has me straight and all is good this time!!!!!
Yes, 29.499 -1575 = 27.924 [call it 27.925] Dial Freq on RX. 
Late hours and working with 4 hours sleep taking it's toll on this OM!   Bob
 

From: [email protected]
To: [email protected]
Date: Fri, 7 Mar 2014 21:37:35 +0000
Subject: Re: LF: 29.499 again starts 2200... dial 27.925 kHz

Aptly   named  after the  classic  Marks  Brothers  film ' A Night  at the  Opera'   total  chaos ! 
 
Q What  is the  final Carrier  Frequency  for  tonight  ?
 
NB- Opera  works  upside  down as  well  , if usb  is needed  to  reach the  qrg , some  Rx's   stop  at 30 KHz , just ensure the  recovered tone  is inside the  50 Hz pass  band
 
G ,)
 
 

Sent: Friday, March 07, 2014 8:03 PM
Subject: Re: LF: 29.499 again starts 2200... dial 27.925 kHz

Bob, Opera users,
 
I think Opera should be fed using dial 27.925 kHz to put you at audio center (not 27.975 kHz).
 
73, Markus

From: Bob Raide
Sent: Friday, March 07, 2014 5:29 PM
Subject: LF: 29.499 again starts 2200...

VLFers;
WH1XBA NY back on tonight.  Dial freq of 27.975 would be more centered instead of 27.945.  Please take note of this.  Window is only 50 hz instead of 100 hz as other OPERA modes.
Will continue with OP2H and hope to stay on longer tonight [0800-0900 hopefully]
<Prev in Thread] Current Thread [Next in Thread>