Re: LF: RE: WSQ,A Weak Signal QSO mode for LF/MF

[schaefer <schaefer@iup.uni-heidelberg.de>]

Hi Markus,

Yes, the program seems to automatically choose the standard audio input and output device, which is not ideal. But it can be done...
I saw (on my LF grabber) that you stopped transmitting so i thought you are already in bed. Now i stopped the program again. The VAC and SL frequency up-shift is used for WSPR-15 on LF all the time.
Another "dial" program :-( Let's do the test tomorrow....

73, GN, Stefan

Am 11.02.2014 23:39, schrieb Markus Vester:

Hi Stefan,

 

ok, that would be nice! For your TX setup, you'll probably need to make VAC the default audio output and then upconvert with a SpecLab instance.

 

This mode is fast! Normally I type something to the keyboard and then leave the room to get some coffee or read or do something else. Now I before I even turn my head, the message has been sent already and the TX is sitting idling away ;-)

 

73, Markus

 

 

From: schaefer

Sent: Tuesday, February 11, 2014 11:15 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: RE: WSQ,A Weak Signal QSO mode for LF/MF

Hi Markus,

I'm just reading. Maybe i'll give it a try soon (today) but still not sure. Stay on air if you have the time :-)

73, Stefan/DK7FC

Am 11.02.2014 22:24, schrieb Markus Vester:

Hi Steinar, Rik,

 

sounds like fun! Would you like to try to listen on LF ?

 

The audio band in the WSQ software seems to be fixed at 1000 Hz, and my LO (dial) is also fixed to 135.5 kHz. So I will attempt to transmit around 136.5 kHz (RF) in a few minutes from now. Due to lower than normal antenna height, my ERP will be only about 0.2 watts or so.

 

Best 73,

Markus (DF6NM)

From: Steinar Aanesland

Sent: Tuesday, February 11, 2014 8:59 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: RE: WSQ,A Weak Signal QSO mode for LF/MF

Hi Rik

I have no TX antenna at the moment . I am only able to RX

S la5vna

From: Rik Strobbe

Sent: Tuesday, February 11, 2014 7:11 PM

To: rsgb_lf_group@blacksheep.org

Subject: LF: RE: WSQ,A Weak Signal QSO mode for LF/MF

Hi Steinar,

are you on for a test?
It very rainy and windy in Belgium, so no TXing tonight, but I can put up a RX station.

73, Rik  ON7YD - OR7T

________________________________________
Van: owner-rsgb_lf_group@blacksheep.org [owner-rsgb_lf_group@blacksheep.org] namens Steinar Aanesland [saanes@broadpark.no]
Verzonden: dinsdag 11 februari 2014 18:41
Aan: *rsgb_lf_group@blacksheep.org
Onderwerp: LF: WSQ,A Weak Signal QSO mode for LF/MF

A new qso mode to try.

http://www.qsl.net/zl1bpu/SOFT/WSQ.htm

de LA5VNA S