Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: This is how I did configure SL. (Was Re: VLF)

from [mal hamilton] [Permanent Link][Original]
To: <[email protected]>
Subject: Re: LF: This is how I did configure SL. (Was Re: VLF)
From: "mal hamilton" <[email protected]>
Date: Sat, 18 Jan 2014 18:25:02 -0000
Authentication-results: mx.google.com; spf=neutral (google.com: 195.171.43.25 is neither permitted nor denied by best guess record for domain of [email protected]) smtp.mail=[email protected]
Delivered-to: [email protected]
Importance: Normal
In-reply-to: <A1BCAED9DA584670BD45DD66CA4A1B3D@Extensa>
References: <0DA1FE059F0241F186659808B4EC3FFD@your91hoehfy9g> <A1BCAED9DA584670BD45DD66CA4A1B3D@Extensa>
Reply-to: [email protected]
Sender: [email protected]
 
TNX PETER WILL CHECK IT OUT.
73 MAL/G3KEV
 
 
Sent: Saturday, January 18, 2014 4:25 PM
Subject: LF: This is how I did configure SL. (Was Re: VLF)
 
Mal, VLF.
This is how I did configure Spectrum Lab at 8270 Hz / 424 uHz.
 
 
Best 73's, Peter - PA1SDB
 
 
 
 
----- Original Message -----
To: rsgb
Sent: Saturday, January 18, 2014 10:12 AM
Subject: LF: VLF
 
VLF
 
setting up on vlf RX at present.
Which qrg is correct for qrss600 etc 8970 or 8270 khz
Now looking at 8270 qrs 600 nil so far this morning
de mal/g3kev
 
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: LF: LF tonite, Bob Raide
Next by Date:  LF: LF tonite, Stefan Schäfer
Previous by Thread:  LF: This is how I did configure SL. (Was Re: VLF), PA1SDB, Peter
Next by Thread:  LF: Line (signal) at 8269.22Hz, Gary - G4WGT
Indexes:  [Date] [Thread] [Top] [All Lists]