LF: Re: Re: VLF

["PA1SDB, Peter" <pa1sdb@amsat.org>]

Hello Mal,

You can download my 3 Spectrum Lab  .USR files here: http://www.qsl.net/pa1sdb/Experiences12.htm

Scroll down to "5 April 2013"

 

You have to adjust 8790 Hz into 8270 Hz in "Filter Control Window" and "FFT" config window.

 

73's Peter - PA1SDB

 

 

 

----- Original Message -----

From: mal hamilton

To: rsgb_lf_group@blacksheep.org

Sent: Saturday, January 18, 2014 11:04 AM

Subject: LF: Re: VLF

Tnx Markus for info.

I have been able to see the acty before on 8970 from DL es OE

I need a USR FILE for speclab for 8270 for optimum results. Maybe Stefan has one

73 and tnx de mal/g3kev

 

 

From: Markus Vester

Sent: Saturday, January 18, 2014 10:38 AM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: VLF

 

Hi Mal,

 

most of the recent activity came from DJ8WX, who has been transmitting long carriers and Op-4H on 8270.004 Hz during several afternoons and evenings. Uwe should be well within your receiving range, and usually appears on the grabbers run by Lubos http://www.ok2bvg.cz/vlfgrabber/, Peter http://www.qsl.net/pa1sdb/, and Paul Nicholson http://abelian.org/vlf/fbins.shtml#b=80&s=sp.

 

Any plans for future VLF transmissions from Scarborough?

 

Best 73,

Markus (DF6NM)

 

 

 

From: mal hamilton

Sent: Saturday, January 18, 2014 11:12 AM

To: rsgb

Subject: LF: VLF

 

VLF

 

setting up on vlf RX at present.

Which qrg is correct for qrss600 etc 8970 or 8270 khz

Now looking at 8270 qrs 600 nil so far this morning

de mal/g3kev