Oh yes, or, a phase meter (M0BMU) and a battery operated variometer
motor. Without an additional cable to the shack. Then the SWR meter in
the shack confirms that everything is fine.
73, Stefan
Am 08.11.2013 19:40, schrieb pat:
Hi All,
A suggestion: battery operated tuning device at antenna end and
"wireless" link back to shack. Wireless can operate at a
non-interfering frequncy (HF/VHF/UHF/Optical).
73
On 08/11/13 16:09, Stefan Schäfer wrote:
Hi Rik,
Am 08.11.2013 16:06, schrieb Rik Strobbe:
Hi Stefan,
remote tuning of the loading should be done by optimizing SWR
(at the TX), not for maximum RF current.
If one keeps that in mind there is no problem.
...which is in agreement with what i said.
But once you have matched your antenna to 50 Ohm on resonance and you
can only vary the reactive part of the antennas impedance (after doing
QSY), then you will get the maximum antenna current at best SWR
(assuming that Rrad+Rloss is constant which is not to far from reality).
I am not sure if I will keep the remote variometer
tuning. It needs some extra wires to the loading coil and
I am not sure how long the small DC motor will function properly with
all the rain and frost coming up.
Here it holds since more than 2 years for LF now..
73, Stefan
--
73 de pat g4gvw
es gd dx
qth nr Felixstowe
East Coast UK
|
|
