Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: HF SWR meters on MF?

To: [email protected]
Subject: Re: LF: HF SWR meters on MF?
From: <[email protected]>
Date: Sun, 29 Sep 2013 17:03:46 -0400
Authentication-results: mx.google.com; spf=neutral (google.com: 195.171.43.25 is neither permitted nor denied by best guess record for domain of [email protected]) smtp.mail=[email protected]; dkim=pass (test mode) [email protected]
Delivered-to: [email protected]
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=juno.com; s=alpha; t=1380488719; bh=47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=; l=0; h=To:Date:Subject:Content-Type:From:Message-Id; b=Wx2NZ+WWlF6bhkp6wl52fJUKAOkSAfnGyBSwVo37YCOhYrAUnCgyzjTesOgxmh73r sc+Xd3cC8QRVCFKHn9rfcN8rC0zktEWkL9M/VlXA0QeqAbbm1p3GhwTP956ju1MqjW YSrVlWIovH8A8AdZ+49yZ+WeR2MVDC1xiHUQ8nMg=
Reply-to: [email protected]
Sender: [email protected]
Hook up the meter and note the position of the needle on the meter
then reverse the input/output,,, after readjusting the meter should show the same
spot ,,, good test for any swr meter
 
Bob K3DJC
 
On Sun, 29 Sep 2013 13:43:27 -0400 Bob Raide <[email protected]> writes:
Stefan;
I have had great results using even an old Heath-kit SWR meter!
 
> Date: Sun, 29 Sep 2013 19:34:52 +0200
> From: [email protected]
> To: [email protected]
> Subject: LF: HF SWR meters on MF?
>
> Hi MF,
>
> Did someone try to use a normal HF SWR meter on 630m? They are
> specificated down to 1800 kHz of course but what about 472 kHz?
>
> At least it would be good to get some indication that:
>
> -There is some output power (e.g. when using an IC706)
> -One is coming closer to resonance
> -Impedance is/comes close to 50 Ohm
>
> I'm supporting a new potential MF RX station with limited equipment (no
> oscilloscope...)...
>
>
> 73, Stefan/DK7FC
>
 
<Prev in Thread] Current Thread [Next in Thread>