Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: RTTY 478.xxx

To: <[email protected]>
Subject: Re: LF: RTTY 478.xxx
From: "Graham" <[email protected]>
Date: Wed, 6 Mar 2013 20:06:09 -0000
Importance: Normal
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]

LNUDTXBTYWHHX-4$1/96;5)2/CLL
PSIHTPJAXBPATOR8JN49K JN49IKJN49IK
QTH: HAIEELBERG HEIDELBERG HEIDELSWC STEFAN STEFAN STEFAC
TX: HOMEMADE CLASE-D PA RUNNING ABOUT 50W FROMNA 12;; SULPLY
ANT: INV-L 30M UP ANDX 70M LONG
FUGTMER INFORMATIOCSK ATN
HTTH VWWW.QRTWMVCOMLXDB
-9/WW.11:".COMB/DU7FN
REPOTS WELCOME VIW RSGB LF REFLECTOR (AT BLACKSHEORG).
73 73 73 73

--------------------------------------------------
From: "Stefan Schäfer" <[email protected]>
Sent: Wednesday, March 06, 2013 7:57 PM
To: <[email protected]>
Subject: Re: LF: RTTY 478.xxx

Eddie,

I'm back on RTTY now. The NAVTEX mode in fldigi cannot be set to 85 Hz shift frequency. So i tried with 170 Hz. However there were no decodes. I have to make some local tests.
Have to go now, will be back later, hopefully.

73, Stefan

PS: In Multipsk, NAVTEX can be set to 85 Hz shift. Will try all that later.


Am 06.03.2013 20:20, schrieb Stefan Schäfer:
Hello Eddie,

Yes, very interesting. Jan/PA3ABK told me that AMTOR-FEC is the same as NAVTEX. A quick google search and wikipedia check confirmed that :-) NAVTEX is available in FLDIGI as well, which is fine :-) I also installed Multipsk now and managed to decode my RTTY (from Twente) even with that program.

Now i would like to try NAVTEX. Will change to that mode now...

73, Stefan

Am 06.03.2013 19:45, schrieb g3zjo:
Hi LF

I am continuing to test RTTY below 478.200 reports very welcome.

PA3ABK came up very nicely in QSO with DK7FC.

73 Eddie G3ZJO



<Prev in Thread] Current Thread [Next in Thread>