Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: Re: Re: DF6NM DK7FC in CT

from [Graham] [Permanent Link][Original]
To: <[email protected]>
Subject: Re: LF: Re: Re: DF6NM DK7FC in CT
From: "Graham" <[email protected]>
Date: Sat, 30 Mar 2013 18:57:31 -0000
Importance: Normal
In-reply-to: <0BE8C4F802314145B0A4A752B6DBDFA5@Black>
References: <000501ce2d39$07bdd430$6401a8c0@JAYDELL> <BC582359D21940BA9C1AD95D79A78EEC@Black> <0BE8C4F802314145B0A4A752B6DBDFA5@Black>
Reply-to: [email protected]
Sender: [email protected]
Oh dear ...  but  at least  only  the  coil  and  not  the  house  !
 
73 -G.
 

Sent: Saturday, March 30, 2013 2:12 PM
Subject: LF: Re: Re: DF6NM DK7FC in CT

Here's the result of 13 minutes at 1W ERP
...more work to do :-(
 
Best 73,
Markus
 
----- Original Message -----
Sent: Saturday, March 30, 2013 1:56 PM
Subject: LF: Re: DF6NM DK7FC in CT

...
At the end of a 15 minute transmission, the temperature at the inside of the litzwire loading coil had gone up to 80°C, so I seem to be limited by current rather than voltage now.
...
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: Thanks to the magnifying glass users, Roger Lapthorn
Next by Date:  LF: Re: Re: Re: DF6NM DK7FC in CT, jrusgrove
Previous by Thread:  LF: Re: Re: DF6NM DK7FC in CT, Markus Vester
Next by Thread:  LF: Re: Re: Re: DF6NM DK7FC in CT, jrusgrove
Indexes:  [Date] [Thread] [Top] [All Lists]