Spiros
Try OP32 , that level of drift is inside the max limits of OP32
, ( round 1 Hz )
You could set timer = 0 , then temperature would tend to stabilise ,
each 32 min cycle would be independent in terms of decode and +/-
temp drift
RN7T looks to be the closest OP32 monitor to you and Wolf showing
as DL-SWL
73 -G..
--------------------------------------------------
From: "Rik Strobbe" <[email protected]>
Sent: Saturday, February 09, 2013 7:47 PM
To: <[email protected]>
Subject: LF: RE: SV8CS on LF
Hi Spiros,
drift is about 0.5Hz on 137kHz = +/- 70Hz drift on the 20MHz xtal
oscillator of the DDS VFO.
One should expect better. Do you have large temperature variations?
73, Rik ON7YD - OR7T
________________________________________
Van: [email protected]
[[email protected]] namens SV8CS- Spiros Chimarios
[[email protected]]
Verzonden: zaterdag 9 februari 2013 19:46
To: [email protected]
Onderwerp: LF: SV8CS on LF
Thank you Stefan.
Looking for any QSO.
Stability very bad from YUMA transmitter on QRSS-60
73, Spiros
SV8CS
Spiros, LF,
Again a nice signal.
73, Stefan
|
