Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: WSJT-X v0.5 r2786_JT9-10

To: "[email protected]" <[email protected]>
Subject: RE: LF: WSJT-X v0.5 r2786_JT9-10
From: Laurence KL1 X <[email protected]>
Date: Thu, 29 Nov 2012 13:38:37 -0900
Importance: Normal
In-reply-to: <A74EBEF795D445B49CBAF22C8D810FD0@White>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <3BD64A7C261A4B98BA0FDA8D1B8ED955@White> <[email protected]> <BD27A68691E547F898ECB3820EAFE088@White>,<A74EBEF795D445B49CBAF22C8D810FD0@White>
Reply-to: [email protected]
Sender: [email protected]
Markus - slow improvement over the Pole so will look overnight if anyone is still running from Eu
 
Laurence
KL1 X Alaska
 

From: [email protected]
To: [email protected]
Date: Thu, 29 Nov 2012 23:31:49 +0100
Subject: Re: LF: WSJT-X v0.5 r2786_JT9-10

Now since 22:10 my antenna is up again, TX running JT9-10 on odd slots, 0.6 W ERP. Will settle on 137424 Hz for a while, ie. 4 Hz above DK7FC.
 
Best 73,
Markus (DF6NM) 

Sent: Thursday, November 29, 2012 7:00 PM
Subject: Re: LF: WSJT-X v0.5 r2786_JT9-10

Stefan,
 
I haven't transmitted yet today, and due to the lousy wx the antenna has been retracted to a low position anyway. Well if you can get the rx side to work, I could probably try to connect the TX later and produce a few milliwatts ERP...
 
73, Markus

Sent: Thursday, November 29, 2012 6:47 PM
Subject: Re: LF: WSJT-X v0.5 r2786_JT9-10

Hi Markus,

Am 29.11.2012 18:24, schrieb Markus Vester:  
Each of your transmissions has been decoded here. Are you receiving JT9 as well?
The program is running and i can see my signal in the waterfal display. However there are no decodes, even no negative decodes. There is just no text and no wav file generated.

I just restarted the program. Please try again!

73, Stefan
<Prev in Thread] Current Thread [Next in Thread>