Re: LF: no decodes, help needed

[g3zjo <g3zjo@psk31.plus.com>]

I am just going to set up now for some local tests on 500kHz JT9-2 to 
see if I can decode my own transmission. I could see PA0O, a strong 
signal but could not de-code it although others could. I set up another 
RX system and could not de-code my own signal and G6AVK could not 
de-code either. Whereas JT9-1 decodes locally and at G6AVK.
I do go through the change mode shutdown and re-start sequence. My first 
JT9-2 transmissions were JT9-1 for twice the time or so it appeared so 
no de-codes.
Eddie G3ZJO

On 28/10/2012 14:56, Stefan Schäfer wrote:
> LF,
>
> I'm now receiving in JT9-1 on 137.43 kHz. I can see a strong JT9-2 
> signal but there is no decode. The signal appears in the programs 
> waterfal display. Timing is accurate. The SNR must be at least 15 dB 
> above the decode level.
> See this capture https://dl.dropbox.com/u/19882028/LF/JT9.png
>
> Has someone an idea?
>
>
>
> 73, Stefan/DK7FC
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2221 / Virus Database: 2441/5358 - Release Date: 10/27/12