Hi Graham My Meter doesn't show that much deviation allowing for the meter dithering less than one Hz. But will look carefully again thanks for info
73 es GL Pete M0FMT IO91UX
AH
Yes I watched a signal wander about during Tx
, it started out side the red lines , then moved inside
, bumped about a little then failed to de-code
I don't think it was a key/time
problem . more one of stability , Op
requires a good level of stability to decode ,
from memory op32 is +/- 1 Hz in
32mins , but its not directly scalable
...... +/- 5 Hz may be for Op4 ?
73 -G..
Sent: Tuesday, July 10, 2012 1:29 PM
Subject: Re: LF: OPERA MONITOR Now ?
Hi Graham
I have found that if I run 24 Watts no body hears me. If I run one Watt
people hear me?? If I boost the 1 Watt rig to 4 Watts same rig people don't
hear me...... dohh! It may be RF into the Opera PIC keyer? I will next time try
screening the PIC keyer. But the thing is my PC decodes everything.... why?? Any
ideas?
73 es GL Pete M0FMT IO91UX
TNX FER RPRT
Am now sending op4 on 500 at 1/2 intervals on the hour and 1/2 hour very
approx. Can you report please if available will try to keep it on most of
afternoon.
73 es GL Pete M0FMT IO91UX
Pete
RX set 500.000 usb , running
OP4 and WSPR rx at the moment
GL !... G ..
Sent: Monday, July 09, 2012 6:26 PM
Subject: LF: OPERA MONITOR Now ?
Hi all
While you are all testing Graham's theory on optimum band usage could
you report my OP4 transmissions. I am using the stand alone PIC 'JNT
designed Opera keyer switching my all Valve (Tube for our Cousins) TX.
Power now increased to four (4) Watts O/P from the original 1Watt at
the antenna up lead. Antenna up lead abt 40 ft x 128ft long E/W. from
IO91UX.
73 Pete M0fmt.
73 es GL Pete M0FMT IO91UX
|