Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: Calibration procedure for HDSDR & TV vhf/uhf Dongle ??

from [Graham] [Permanent Link][Original]
To: <rsgb_lf_group@blacksheep.org>
Subject: LF: Calibration procedure for HDSDR & TV vhf/uhf Dongle ??
From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
Date: Wed, 27 Jun 2012 20:37:07 +0100
Importance: Normal
Reply-to: rsgb_lf_group@blacksheep.org
Sender: owner-rsgb_lf_group@blacksheep.org
Calibration procedure  for  HDSDR &   TV  vhf/uhf  Dongle ??
Set-up  is  running  fine  with the up-dated  eK4  driver.
 
Frequency off set on 145 MHz is round  6Khz
 
Q Is there a  calibration procedure to  null out this  off  set??
 
I see  there is a  correction window in  HDSDR , but  is this  correction  going  to  hold over the tuning  range ?
 
Tnx -G..
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: Opera 500kc/s 18:00 BST tonight, Graham
Next by Date:  Re: LF: Calibration procedure for HDSDR & TV vhf/uhf Dongle ??, M0FMT
Previous by Thread:  LF: 475,5Kc Transmission "SA", Uwe Wensauer
Next by Thread:  Re: LF: Calibration procedure for HDSDR & TV vhf/uhf Dongle ??, M0FMT
Indexes:  [Date] [Thread] [Top] [All Lists]