|
Hello Marcus,Eddie,LF
Yes,the loading coil is indoors,and i do not have
any place.
on the roof of the garage are 15 antennas,and the
garden is to dangerous because off the children,.but i never give
up,
will be continue,
henny cpm
73's
----- Original Message -----
Sent: Friday, March 23, 2012 10:40
AM
Subject: Re: LF: 8.970Khz - high
voltage
Hi Henny,
do you have the loading coil indoors? In my experience it is very
difficult to get a reliable and low loss feedthrough on the
high-voltage side. Can you try to place the coil outside, eg. on the roof of
the garage?
Best 73,
Markus (DF6NM)
-----Ursprüngliche
Mitteilung----- Von: henny van elst < [email protected]> An: rsgb_lf_group
< [email protected]> Verschickt: Fr, 23 Mrz 2012 9:07
am Betreff: Re: LF: 8.970Khz
Hi Eddie,LF,
there is a hole of 5cm diameter and 20 cm long in
the wall,and that is the place were is go wrong,maybe glass or
porcelain will help ,and the antenna of
course,henny pa3cpm
will be continue
73's
----- Original Message -----
Sent: Friday, March 23, 2012 9:49
AM
Subject: Re: LF: 8.970Khz
Hi Henny
Sorry to hear about your problems.
A
need for PTFE insulated wire ?
73 Eddie
On 22/03/2012 11:53,
henny van elst wrote:
Hi Eddie,LF
The tx is off,fire again,
henny cpm
73's
----- Original Message -----
Sent: Thursday, March 22, 2012
12:14 PM
Subject: Re: LF: 8.970Khz
GM Henny
I am watching. http://g3zjo.bplaced.net/index.htm
Also running a
test on 9.008kHz using QRPpppppp, low output from my Netbook headphone
skt. and 1m of wire, this set up is not QRMing 8.970kHz today. Signal
visible in my DFCW-60 Window.
73 Eddie
On 22/03/2012
10:44, henny van elst wrote:
Gm LF,
The TX is on,
8.970Khz .
antenna current 400 mA,
HENNY PA3CPM
73'S
|
