|
Peter,
as Wolf noted, the French VLF frequencies are a bit
variable. Looking at your wideband VLF, I'd recommend locking to GQD 22.1 kHz,
which is usually very accurate. DHO 23.4 kHz is also strong and stable,
but they have the habit of taking the TX off air during
their coffee break between 7 and 8 UT.
Confirming your SID observation at 16:41: GOES 15
x-ray data shows a C4 solar flare, and the SID is visible on
several VLF grabbers, as well as on our Loran-C monitors.
Best of luck,
Markus (DF6NM)
Sent: Friday, March 23, 2012 11:23 PM
Subject: Re: LF: Now using Mini Whip here on 8970 Hz in JO33kh,
Appingedam
Hi
Peter,
you could check the calibration later (after the tests on 8.97
kHz) by temporarily switching the spectrogram's center frequency to 11.904761
kHz (Russian 'Alpha' on that frequency is currently active). It's not an ideal
check because of the periodic signal -> fence-like spectrum, but maybe the
MSK transmitter on 20.9 kHz is not such an ideal source. Anyway I will check it
with the GPS-disciplined receiver, if FTA is really 'spot on' frequency.
All the best,
Wolf DL4YHF .
P.S. Suitable GPS
receivers (with low jitter on the PPS output) are quite affordable now. I use a
Garmin GPS 18x LVC, which is sensivite enough to be operated indoors. It used to
be available (or still is) at RS Components and other distributors. The receiver
doesn't need to have a 10 kHz output; a low-jitter PPS output (one pulse per
second) is sufficient to compensate the soundcard's sampling rate continuously,
and provide a very accurate timestamp for other experiments.
Am
23.03.2012 23:00, schrieb PA1SDB, Peter:
Hi Eddie,
I have set that 'Sampling rate detector" in
SL.
I use 20k9 FTA, the indicator is Green, I
have Enabled it.
What els have I to do ????
I use that Bandpas filter in the left Black
box.
8970 Hz center, 500 Hz width.
Spectrum on L2
FTT input size is 524288
Decimal input by is 216
That gives:
Effect of FFT settings with fs= 48.0000 kHz:
Width
of one FFT-bin: 423.855 uHz
Equiv. noise bandwidth: 635.783 uHz
Max freq
range: 8.91444 kHz .. 9.02556 kHz
FFT window time: 2359.296 s
Overlap
from scroll interval: 87.5 %
I did not callibrate it somehow. On 30 meters
/ QRSS I use that time sign on 9996 KHz. I don't know how to
callibrate it on VLF.
I can't whistler that stable :-)
That signal on 8.969,995 has a kund of fading. I hope
it's not something local.
Feel free to inform me if I do somnething totaly wrong
!
No hard feelings :-)
73's Peter - PA1SDB
----- Original Message -----
Sent: Friday, March 23, 2012 8:51
PM
Subject: Re: LF: Now using Mini Whip
here on 8970 Hz in JO33kh, Appingedam
Peter
Very good, how is your calibration? Henny is on
8.97000 you have a line at 8.96995 if it stops at 23.00 that is when Henny
is QRT.
73 Eddie G3ZJO
On 23/03/2012 19:59, PA1SDB, Peter
wrote:
Hello all,
Today I did plant the "PA0RDT Mini-Whip" antenna
in the backyard at about 20 meters from the house and 4 meters above
ground level.
Last 2 week I was using 2 pasive loop antenna's
who where connected direct into the mike input.
That wasn't a succes...
I hope to see some results soon
:-)
Take a look at the links below. I
did start logging on Friday evening at about 19:00 UTC, so
perhaps I have to adjust contrast later.
73's, Peter - PA1SDB
QTH is Appingedam in JO33kh, in the very North-
East part of The
Netherlands.
|
|
