Re: LF: Re: Re: Re: CQ DE WE2XGR/6 Will be on 497Khz dial start agn at 2330-Bob

["mal hamilton" <g3kevmal@talktalk.net>]

Graham

I am using a CW TX and place the carrier on 501.5 Khz. and likewise on 137.5 Khz I assume this is correct. Using a ssb TX needs a different approach. The RX end might be more critical but I suppose if one selects  the USB mode with sufficient bandwidth to receive the transmission between the green lines it should work.

 To take advantage of a RX with a narrow cw filter it might be an advantage to use CW mode and adjust the BFO to position the received transmission in the correct slot. I must try this

 

de  mal/vg3kev

----- Original Message -----

From: Graham

To: rsgb_lf_group@blacksheep.org

Sent: Friday, February 17, 2012 11:58 AM

Subject: Re: LF: Re: Re: Re: CQ DE WE2XGR/6 Will be on 497Khz dial start agn at 2330-Bob

Mal,

 

Make sure you are  in the  right  frequency  band  for the  speed , or  no  stations  will  decode  you  ,   501.5 is on the  change over  frequency .  stay  with  OP4   as  16  is not  giving  good  decodes  at  range.

 

G..

From: mal hamilton

Sent: Friday, February 17, 2012 11:49 AM

To: rsgb_lf_group@blacksheep.org

Subject: LF: Re: Re: Re: CQ DE WE2XGR/6 Will be on 497Khz dial start agn at 2330-Bob

Tnx Jay

I could try tonite START 2300 utc 501.5 signal freq. Sigs to the West are low at present on 137 es from now on will not be as good as over the peak Xmas period generally speaking

 

de mal/g3kev

 

 

----- Original Message -----

From: jrusgrove@comcast.net

To: rsgb_lf_group@blacksheep.org

Sent: Friday, February 17, 2012 11:22 AM

Subject: LF: Re: Re: CQ DE WE2XGR/6 Will be on 497Khz dial start agn at 2330-Bob

Mal

 

501.5 kHz was clear this side last night ... will be glad to park a receiver on 501.5 to look for your (or any other EU) signals. Note that Stefan's signal was more than 10 dB down from usual last night although it looks like we're getting a fairly quick DST index recovery from the latest event.

 

Jay W1VD  WD2XNS  WE2XGR/2   

 

 

----- Original Message -----

From: mal hamilton

To: rsgb_lf_group@blacksheep.org

Sent: Friday, February 17, 2012 4:00 AM

Subject: LF: Re: CQ DE WE2XGR/6 Will be on 497Khz dial start agn at 2330-Bob

Bob,      497 is still in the cluttered area ie 498.5 actual freq. How about 508 or higher for NA tx. In the UK 501.5 is not the ideal freq either, bad for the traditional CW operator working around 501.5 - 502.5 Khz. How about a spot higher up like 504 near the top band edge out of the way.

East coast USA stns let me know when the freq is clear and I will try some OPERA before the dx season dries up for this year.

de mal/g3kev

 

----- Original Message -----

From: Graham

To: rsgb_lf_group@blacksheep.org

Sent: Thursday, February 16, 2012 10:55 PM

Subject: LF: CQ DE WE2XGR/6 Will be on 497Khz dial start agn at 2330-Bob

 

 

WE2XGR/6 Will be on 497Khz   dial    start agn at 2330-Bob

 

 

G;
N6ry had a long list of decodes. Going west the band was good. N6RY was rxing anywhere from -17 to -21. Also decodes from W0YSE in UTAH he was having bad QRN condtions but still some solid decodes. Nothing from VK. Surprisingly nothing across the pond.
Hopefully better tonite. I have been asked to move out of the DX window as it is rite in your small transmit freq window. Some rxing stations here in NE are trying to decode UK/EURO opera/ros. Wish them luck but skip as of late has been short with very strong sigs close in. I overload their RX. 
I checked PA3WEG RX and 497 dial [498.5 sigs] looks very clean. I'll fire up there and notify on 600 mrg-lowfer-opera about move.
Will be on 497 start agn at 2330-Bob