Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Dual Beacon test wspr & OP4 -now-

To: <[email protected]>
Subject: Re: LF: Dual Beacon test wspr & OP4 -now-
From: "Graham" <[email protected]>
Date: Sun, 12 Feb 2012 19:51:20 -0000
Importance: Normal
In-reply-to: <002901cce9b5$15fdd1d0$0401a8c0@xphd97xgq27nyf>
References: <BF70730344B04A21B4BFE6D5366CD299@AGB> <67A9D0CA69F3450AAA5A6F664EE1CAE1@AGB> <002901cce9b5$15fdd1d0$0401a8c0@xphd97xgq27nyf>
Reply-to: [email protected]
Sender: [email protected]
1  or  2  watts feed  to the  Ae   per  mode  at the  moment , decodes  showing   -26 dB  which  is starting  to  be  under the  noise  ?

Sent: Sunday, February 12, 2012 6:35 PM
Subject: Re: LF: Dual Beacon test wspr & OP4 -now-

Graham es CO
You are the only one that I can decode. There is a serious problem somewhere because I can copy the USA on normal CW on 500 during night time.
Are all the UK stns QRPP or what ?? Seems strange with my antennas no copy !! yet no problem with DX In the past I have a 2x on 500 with the USA
 
de mal/g3kev
 
----- Original Message -----
From: Graham
Sent: Sunday, February 12, 2012 6:05 PM
Subject: Re: LF: Dual Beacon test wspr & OP4 -now-

5  watts  per carrier now  .. 

From: Graham
Sent: Sunday, February 12, 2012 5:46 PM
Subject: LF: Dual Beacon test wspr & OP4 -now-

Dual Beacon  test  wspr &  OP4 .
 
TX only  due to  overlapping   ,
 
Carrier   20 watts  per  mode 
 
WSPR  = 100%   Tx
 
OP =  1  min  timer 
 
Running  now   1645 z
 
TX   set   500 KHz    USB
 
Rx   set  500Khz  USB   , run   WSPR and  Opera   as  normal 
 
WSPR   audio   1500 Hz
Op  audio   app   1400 Hz  (may  change  but  should  not  select 1500 )
 
 
Tnx  all  G..
 
G0NBD
<Prev in Thread] Current Thread [Next in Thread>