To: | <rsgb_lf_group@blacksheep.org> |
---|---|
Subject: | Re: LF: Dual Beacon test wspr & OP4 - QRT 0100z |
From: | "Graham" <g8fzk@g8fzk.fsnet.co.uk> |
Date: | Mon, 13 Feb 2012 01:09:10 -0000 |
Importance: | Normal |
In-reply-to: | <EAD4E602C5E045B5ACC07EBEDF428B6A@AGB> |
References: | <BF70730344B04A21B4BFE6D5366CD299@AGB> <67A9D0CA69F3450AAA5A6F664EE1CAE1@AGB> <9D8727654A444FBBAFA03042F5277696@AGB> <8668046204244D4CB4418E3EAFEC7CC5@AGB> <EAD4E602C5E045B5ACC07EBEDF428B6A@AGB> |
Reply-to: | rsgb_lf_group@blacksheep.org |
Sender: | owner-rsgb_lf_group@blacksheep.org |
From: Graham
Sent: Sunday, February 12, 2012 7:39 PM
Subject: Re: LF: Dual Beacon test wspr & OP4
-now- Power down to round 3 / 4 watts showing
on meter with 2 tones , difficult to measure with the set up at
the moment , just checked the carrier
balance with 2 tones and both peaks on
the same line on spec-lab , audio level
below onset of alc Tx is a little over kill for 4
watts , Racal MA1723 exciter , split drive
to qty 2 skanti 250 w o/p amps combined with
5 port transformer combiner . no corona discharge :
-) Local check using RA6790 , 3 Khz usb with agc
-off , noise floor on spec lab ~ -120 dB Tnx all for taking a look , 73 -G. From: Graham
Sent: Sunday, February 12, 2012 6:05 PM
Subject: Re: LF: Dual Beacon test wspr & OP4
-now- 5 watts per carrier now .. Dual Beacon test wspr & OP4 . TX only due to overlapping , Carrier 20 watts per mode WSPR = 100% Tx OP = 1 min timer Running now 1645 z TX set 500 KHz USB Rx set 500Khz USB , run
WSPR and Opera as normal WSPR audio 1500 Hz Op audio app 1400 Hz (may
change but should not select 1500 ) Tnx all G.. G0NBD
|
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: LF: Dual Beacon test wspr & OP4 -now-, Graham |
---|---|
Next by Date: | LF: 136k last night, Mike Dennison |
Previous by Thread: | Re: LF: Dual Beacon test wspr & OP4 -now-, Graham |
Next by Thread: | LF: 136k last night, Mike Dennison |
Indexes: | [Date] [Thread] [Top] [All Lists] |