Steinar,
600 s/pix. is a good start point for tmw but i would suggest to use a
even narrower FFT bin width like 424 uHz. Also a well configured noise
blanker can easily help to get another 6 dB S/N as we have seen in the
past.
I attach you a "DFCW-6000.usr" which you can load into SpecLab. This
was used successfully in many last experiments on many grabbers :-)
Not you have to wait some 10 minutes until the first pixel appears so
do not wonder ;-)
73, Stefan/DK7FC
Am 25.11.2011 20:49, schrieb Steinar Aanesland:
Stefan
I had plans
to use 600 sec/step 1mHz res. you will find under "quick
settings/Slow Morse(..)" in SpecLab, but f you have a better solution,
I will be happy to try it.
la5vna S
Den 25.11.2011 20:26, skrev Stefan Schäfer:
> Thanks Steinar,
>
> But it will be a first pre-test, i may not get the maximum
strength that i want but we'll see.
>
> How do you receive 8970 Hz on the software side? Do you have a
"DFCW-6000.usr" for the SpecLab settings or how did you configure the
software (which?)?
>
> 73, Stefan
>
> Am 25.11.2011 20:18, schrieb Steinar Aanesland:
>>
>> I will try to capture you Stefan , but I am afraid I got too
much noise here to get a good result :(
>>
>> LA5VNA S
>>
>>
>>
|
DFCW-6000.USR
Description: Text document
|
