Hi Eddie,
Unfortunately my PA (or rather the VFO) seems to cause problems, so i
cannot transmit today :-( I can remote control the TX but will be in
Heidelberg again in some days. So it takes some time to see my signal
again on 137 :-(
Anyway, i have the new PA here and will finish (test) it in the coming
days. Then i expect less problems and a stronger signal.
Vy interesting about the RX loop. Another project here too. But first i
come back to VLF with the fixed antenna...
Tell me more about the gain compared to your omnidirectional antenna,
pse. One day we will try a CW contact, don't we? :-)
So maybe you'll get a test signal by other LF TX stations these days.
Good luck!
Stefan/DK7FC
Am 02.06.2011 09:22, schrieb qrss:
Hi Stefan
I would welcome some signals from DL today (02.06.2011.)
I am testing a new Loop,10t of 0.9mm 46 strand Litz wire fixed tuned
with polystyrene capacitors 800mm x 800mm for 136kHz outside. It
seems to perform very nicely.
136kHz are the only active Views on my Grabber at the moment.
http://g3zjo.bplaced.net
The coupling is by another very pleasing 'Revenge'.
A CFL energy saving lamp in the house decided to cause QRM on 136kHz,
I stripped the lamp and used the toroid.
73 Eddie G3ZJO
On 02/06/2011 02:09, Stefan Schäfer wrote:
Hello Martin,
I'm calling CQ in QRSS-10 in the moment but probably you are already
in bed ? ;-)
Tomorrow is a free day for most in Germany and so there may be some
more activity. BTW, are you QRV, TX wise?
Best 73, Stefan/DK7FC
Am 01.06.2011 21:32, schrieb Martin Evans:
136 seems to be very clean and quiet this evening.
Is anyone planning on any transmissions?
I can't see anyone at the moment.....
Martin GW3UCJ Swansea IO81CR
|
