Re: LF: VX9MRC

To:	[email protected]
Subject:	Re: LF: VX9MRC
From:	John Bruce McCreath <[email protected]>
Date:	Wed, 23 Feb 2011 13:38:10 -0500
In-reply-to:	<[email protected]>
References:	<[email protected]>,<[email protected]> <BF4A524700075746A6467658DFC7102C88B050FED9@ICTS-S-EXC2-CA.luna.kuleuven.be> <[email protected]> <[email protected]>
Reply-to:	[email protected]
Sender:	[email protected]

Hi Joe,

No luck copying your signal three nights in a row!  Maybe your antenna DOES 
have a F/B ratio!
I've been using the same setup that has worked before, so perhaps I've got a 
bug somewhere. 

73, J.B., VE3EAR

LowFER Beacon "EAR"
188.830 kHz. QRSS30
EN93dr

<Prev in Thread]	Current Thread	[Next in Thread>
RE: LF: VX9MRC, (continued) RE: LF: VX9MRC, Rik Strobbe RE: LF: VX9MRC, jcraig RE: LF: VX9MRC - What mode PSE, Andy - KU4XR Re: LF: VX9MRC - What mode PSE, John Bruce McCreath RE: LF: VX9MRC, Rik Strobbe RE: LF: VX9MRC, jcraig LF: ARGO settings, John Bruce McCreath Re: LF: ARGO settings, Mike Dennison Re: LF: ARGO settings, John Bruce McCreath Re: LF: VX9MRC, Graham Re: LF: VX9MRC, John Bruce McCreath <= LF: VX9MRC, John Gibbs LF: Re: VX9MRC, mal hamilton Re: LF: VX9MRC, Andy - KU4XR Re: LF: VX9MRC, John Bruce McCreath Re: LF: VX9MRC, jcraig

Previous by Date:	Re: LF: Re: Soldering enamelled copper wire, John Andrews
Next by Date:	Re: LF: Re: Soldering enamelled copper wire, Chris Trayner
Previous by Thread:	Re: LF: VX9MRC, Graham
Next by Thread:	LF: VX9MRC, John Gibbs
Indexes:	[Date] [Thread] [Top] [All Lists]