|
Rik,
Looks like I need another 3dB
for 100% decode !
fb on the sound card .. may be a change ,
that was the same problem with
wspr , sample rate not locked .
Q have you only 2 decodes ?
tnx - G..
Sent: Saturday, August 28, 2010 5:57 PM
Subject: RE: LF: ros -MF 502 K -on now-
Graham,
just had this copy while ROS and CMSK software
were running simultanious:
RX1: 16:55 @ 2,1 Hz: CQ,,E G0NBD IN IO83LK
<STOP> -35 dB 594 km @ 300º
73, Rik ON7YD -
OR7T
G..
Could be a problem with the
sound card when I tried to run the two modes , ,
cmsk lock's to 8KHz and ROS needs 48Khz , result was ,
ros did not decode after the initial frame lock .. may
of changed now , the driver panel for the m-audio
card shows the sample rate
G.
Sent: Saturday, August 28, 2010 4:33 PM
Subject: Re: LF: ros -MF 502 K -on now-
Rik, LF,
Sending CMSK8 between grahams ROS but on 502.3kHz dial USB.
Any reports will be welcome.
73
Gary - G4WGT.
On 28 August 2010 16:22, Graham <[email protected]>
wrote:
Thanks Rik
That is useful ! .. will leave it
running for a while
I was not sure if the 'repairs' to
the Ae had
reduced the efficiency , as I used to
be able
to decode via the delft web-sdr ,in
the day but as yet
no decodes
G .
nb, you have caught the start
and stop frames
CD DE G0NBD IN IO83LK
Sent: Saturday, August 28, 2010 4:15 PM
Subject: RE: LF: ros -MF 502 K -on now-
Graham:
RX1: 15:05 @ 2,1 Hz: SQ DE G0NBD P[*2