Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: ros-mf 1 or 7 cq

from [Graham] [Permanent Link][Original]
To: <[email protected]>
Subject: Re: LF: ros-mf 1 or 7 cq
From: "Graham" <[email protected]>
Date: Tue, 24 Aug 2010 19:10:30 +0100
Importance: Normal
In-reply-to: <39631396DA574E75B988A95E2EC6F491@AGB>
References: <39631396DA574E75B988A95E2EC6F491@AGB>
Reply-to: [email protected]
Sender: [email protected]
Mode set MF-1 , rx on, beacon auto report .
Tnx GW3UCJ  rpt via     psk-reporter
carrier power =  25/30 watts 
 
G..

From: Graham
Sent: Tuesday, August 24, 2010 6:06 PM
Subject: LF: ros-mf 1 or 7 cq

Running   ros-mf 1 or 7 cq
 
tx dial  502 Khz usb
 
rx dial  502 khz usb
 
tnx - G ..




[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  LF: QRPp QRSS3 beacon running this evening on 137.675kHz, Roger Lapthorn
Next by Date:  Re: LF: ros-mf 1 or 7 cq, Graham
Previous by Thread:  LF: ros-mf 1 or 7 cq, Graham
Next by Thread:  Re: LF: ros-mf 1 or 7 cq, Graham
Indexes:  [Date] [Thread] [Top] [All Lists]