Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: ros-mf 1 QRP 1 w Ae feed

from [Graham] [Permanent Link][Original]
To: <[email protected]>
Subject: LF: ros-mf 1 QRP 1 w Ae feed
From: "Graham" <[email protected]>
Date: Tue, 24 Aug 2010 22:43:23 +0100
Importance: Normal
In-reply-to: <71A53C4983304A08AD25E9E1F7CDCE51@AGB>
References: <39631396DA574E75B988A95E2EC6F491@AGB> <E49698072FE342A183B8853FEF532297@AGB> <654274F65FB84C8389FF7794B7C3DDFB@AGB> <71A53C4983304A08AD25E9E1F7CDCE51@AGB>
Reply-to: [email protected]
Sender: [email protected]
Power  set   1 watt  rf feed  21:45  hrs
 
will  close at   2300 GMT 

From: Graham
Sent: Tuesday, August 24, 2010 9:01 PM
Subject: LF: ros-mf 1 or 7 cq QRP

Power set  = 2.5 watts  Ae  feed , 20:00  hrs
2.5W  added  to  text
 
G ..
 

From: Graham
Sent: Tuesday, August 24, 2010 8:33 PM
Subject: Re: LF: ros-mf 1 or 7 cq

OR7T  @  -30  dB  !
 
 25/30  watts  , rx  -  502 -on-
beacon  auto reply  mode -on-

From: Graham
Sent: Tuesday, August 24, 2010 7:10 PM
Subject: Re: LF: ros-mf 1 or 7 cq

Mode set MF-1 , rx on, beacon auto report .
Tnx GW3UCJ  rpt via     psk-reporter
carrier power =  25/30 watts 
 
G..

From: Graham
Sent: Tuesday, August 24, 2010 6:06 PM
Subject: LF: ros-mf 1 or 7 cq

Running   ros-mf 1 or 7 cq
 
tx dial  502 Khz usb
 
rx dial  502 khz usb
 
tnx - G ..










[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  LF: RE: ros-mf 1 or 7 cq, Rik Strobbe
Next by Date:  LF: 137,775.5KHZ, henny van elst
Previous by Thread:  LF: ros-mf 1 or 7 cq QRP, Graham
Next by Thread:  LF: RE: ros-mf 1 or 7 cq, Rik Strobbe
Indexes:  [Date] [Thread] [Top] [All Lists]