LF: Re: Noise R75 - rs232 from smpsu -

["Alan Melia" <alan.melia@btinternet.com>]

Hi Laurence from memory ....I dont use laptops so didnt need do it.....the
easiest way of "decoupling" the serial comms loops,  is a pair of opto
couplers on the RS-232 there are app notes in the data sheets for most.
Alan G3NYK

----- Original Message ----- 
From: "Laurence KL7UK" <hellozerohellozero@hotmail.com>
To: <lowfer@mailman.qth.net>; <rsgb_lf_group@blacksheep.org>
Sent: Friday, July 23, 2010 9:47 PM
Subject: LF: Noise R75 - rs232 from smpsu -





Anyone done any common mode noise mitigation from the RS232 port of the R75
Rx> - the noise coming up from the SMPSU/processor from the old Dell puter -
cable is double screened - choking off using J (75) type has seen little
improvement - this is my last hurdle to unimpeded remote rx on 137 - any
pointers appreciated - everythings bonded and Ive tried the on/off earth
tricks at various locations -



Anyone had any success of powering a Dell D series from a non standard non
switched PSU? (the noise goes away when the DC from the Black Dell brick is
removed but it may also be partially screen/processor noise...)



with thanks



Laurence Kl7UK

_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5