Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: EME / 500/-1 0- 10 Watts per stream

To: <[email protected]>
Subject: Re: LF: EME / 500/-1 0- 10 Watts per stream
From: "Graham" <[email protected]>
Date: Sun, 2 May 2010 22:24:50 +0100
Importance: Normal
In-reply-to: <243C54244F5A43BB90D4BD0A3E9D5A2D@AGB>
References: <B2DE0B93724F41E28BF5ACAA5646AC77@AGB> <A9FE0044F30346A5A4BB9BDA12B37401@AGB> <7E3FA25571354834A324CF53C8B07FF2@AGB> <243C54244F5A43BB90D4BD0A3E9D5A2D@AGB>
Reply-to: [email protected]
Sender: [email protected]
Reduced to  10  watts  per  steam  22-30  hrs local
 
Tnx - G .
 
 

From: Graham
Sent: Sunday, May 02, 2010 10:13 PM
Subject: Re: LF: EME / 500/-1 0- 25 Watts per stream

Reduced to  25  watts  per stream , added 1234567890 to the text
Tnx  for  reports
 
G .

From: Graham
Sent: Sunday, May 02, 2010 9:40 PM
Subject: LF: EME / 500/-1 0- 40 Watts per stream

As of  21-15  local time power  set ..40  watts  per  data  stream  (may be  too  much ?)
 
NB : Pls  run  x2 session's  of ros   for  comparative  test
 
Will  run till  round  midnight
 
Thanks  for the  reports  via  the  email  system  and the  ref
 
73 - G

From: Graham
Sent: Sunday, May 02, 2010 8:28 PM
Subject: LF: ROS EME / 500/-1 0- Reduced power

I am reducing power to  1 watt  Ae feed  to  allow  Gary  to  do  some low level  checks
will  qro  later
 
G ..

From: Graham
Sent: Sunday, May 02, 2010 7:10 PM
Subject: LF: ROS EME / 500/-1 Bit speed 502.00 KHz

Dual mode  ROS Beacon running , check  for  activity >> http://www.wireless.org.uk/grab/
 
ROS    EME
 
ROS    500 Hz / 1 Bit  speed
Dial  set  502.000 KHz USB
 
Dual reception by  running  two  sessions  of  ROS . , set  eme  and  HF  500 rx  1  bit  speed
select the  minimum  AFC  range
 
The  HF  500/1 bit  should  out  perform the  eme  mode
Software  download >>  http://rosmodem.wordpress.com/
Reports  welcome via  ref  or the  auto  email  mode
 
Note  - Due to  low af  drive  level - NO RX -
 
Tnx - G .










<Prev in Thread] Current Thread [Next in Thread>