Re: LF: Re: 503.600 kHz WSPR

[Gary - G4WGT <g4wgt@tiscali.co.uk>]

OK Jim,

I saw your signal trace good enough for a decode but nothing, I think you are late due to PC clock error.

Yes, we will try again, I am sure we can make the QSO.

Cheers es Good Night,

Just off to bed.

Gary.

On 12 February 2010 22:18, James Cowburn <james.cowburn@virgin.net> wrote:

Hi Gary

 

I got multiple decodes of your CQ all around the -12dB mark and I replied but to no avail.   I saw you’d gone QRT so I’m back on 502.4

 

We will have to try again another evening

With best regards

 

 

Jim

 

 

Dr. James Cowburn

E james.cowburn@virgin.net

 

---

From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Gary - G4WGT
Sent: 12 February 2010 19:38

To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: Re: 503.600 kHz WSPR

 

Jim,

 

We are all "Bozo's" at some point in time :-))

 

Are you wanting to try WSPR 2 way again tonight ?

 

73, Gary - G4WGT.

On 12 February 2010 19:13, James Cowburn <james.cowburn@virgin.net> wrote:

A bozo I will be!!

 

 

---

From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Gary - G4WGT
Sent: 12 February 2010 19:07

To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: Re: 503.600 kHz WSPR

 

Roger, Jim,

 

I find it slightly different to Jim's description in such that if while in monitor mode or calling CQ you see a station's call decoded all you need to do is "double click" the callsign & the software will place the call sign in the correct places in the message boxes. All you need to know then is which Tx reply to use. There is a guide in the "help" menu.

 

I found that the "The Complete Bozo's Guide to JT65A by Andy K3UK" was most enlightening. The JT65A mode is very very similar to JT4A & WSPR 2 way (QSO) mode.

 

You can find it at :-

 

http://www.obriensweb.com/bozoguidejt65a.htm

 

Cheers, Gary - G4WGT.

 

On 12 February 2010 15:12, Roger Lapthorn <rogerlapthorn@gmail.com> wrote:

Thanks Jim. We'll have to give this a go next week.

73s
Roger G3XBM

 

On 11 February 2010 23:19, James Cowburn <james.cowburn@virgin.net> wrote:

Hi Rog

 

Run the WSJT7 programme and select wspr mode

 

If you receive a signal in the window using the spectrum display click on it and click decode

 

When you have callsign and locator decoded in the main window, enter these in the relevant boxes and then click on gen stnd msges on the right hand side and it will enter the right text for each message on TX1 to Tx5

 

If the sending station is “going first” then you send the 2^nd/4^th messages and 73s after each is how I see it.

 

CQ is message 6

 

A lot quicker than QRSS but do watch out for the Witchfinder General as he will burn you at the stake!!

 

 

 

With best regards

 

 

Jim

 

 

Dr. James Cowburn

---

From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Roger Lapthorn
Sent: 11 February 2010 22:58
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: Re: 503.600 kHz WSPR

 

Gary/Jim/Jim,

Not having tried WSPR in QSO mode, can you clarify the method/procedures used please? Must give this a try too.

73s
Roger G3XBM

On 11 February 2010 22:37, James Moritz <james.moritz@btopenworld.com> wrote:

Dear Gary, Jim, LF Group,

Thanks for the WSPR QSOs with Gary:

213202  13   0 -0.5    -6  0  CQ G4WGT IO83
213602  10  -2 -0.3    -5  0  M0BMU <G4WGT> S1
213602  16   4 -0.2     6  0  G7NKS IO92 20
214002  13   4 -0.3    -5  0  M0BMU <G4WGT> S1
214402  16  -1 -0.5    -5  0  M0BMU <G4WGT> R S6
214402  17   5 -0.5     6  0  G7NKS IO92 20
214802  13   0 -0.3    -5  0  73 DE G4WGT IO83

And Jim:

221002  10   4 -0.4    31  0  M0BMU <G7NKS> S2
221402  10   4  0.0    31  0  <M0BMU> G7NKS RRR
221802   9   5 -0.5    31  0  73 DE G7NKS IO92

Well, at least it's quicker than QRSS!

Cheers, Jim Moritz
73 de M0BMU

----- Original Message ----- From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
To: "LF Group (RSGB)" <rsgb_lf_group@blacksheep.org>
Sent: Thursday, February 11, 2010 8:41 PM
Subject: LF: 503.600 kHz WSPR

Hi,

If there is someone interested out there I am running WSPR 2 way tonight on
503.600 kHz, dial set at 502.100 kHz USB.

Please look (monitor) for my signal. Reports & replies/calls will be
welcome.

73, Gary - G4WGT.

 

--

http://g3xbm-qrp.blogspot.com/
http://www.g3xbm.co.uk
http://www.youtube.com/user/G3XBM
G3XBM    GQRP 1678      ISWL G11088

--

http://g3xbm-qrp.blogspot.com/
http://www.g3xbm.co.uk
http://www.youtube.com/user/G3XBM
G3XBM    GQRP 1678      ISWL G11088