LF: Re: Re: Re: Re: WSPR on 137 kHz

["Clemens Paul" <cpaul@gmx.net>]

> For some reason WSPR 1.12 did not upload (internet connection being ok).
The reason was my fault [again -:( ].
Wrong qrg format:
kHz instead of MHz.
The three uploads appear in the database if you chose all instead of LF/VLF.
Sorry for the inconvenience.

73
Clemens
DL4RAJ

----- Original Message ----- 
From: "Clemens Paul" <cpaul@gmx.net>
To: <rsgb_lf_group@blacksheep.org>
Sent: Saturday, December 05, 2009 11:26 PM
Subject: LF: Re: Re: Re: WSPR on 137 kHz


> Hello Gus, LF,
>
> three spots so far (between the noise periods of the heating system).
>
> 2142   9  0.0 136.151500  0 SM6BHZ JO57 17
> 2158   9  0.0 136.151500  0 SM6BHZ JO57 17
> 2206   8  0.3 136.151500  0 SM6BHZ JO57 17
>
> For some reason WSPR 1.12 did not upload (internet connection being ok).
> So I've just downloaded and installed V2.0.
> Let's see if it works for the rest of the night.
>
> 73
> Clemens
> DL4RAJ
>
> ----- Original Message ----- 
> From: "Gus" <begu@algonet.se>
> To: <rsgb_lf_group@blacksheep.org>
> Sent: Saturday, December 05, 2009 7:54 PM
> Subject: LF: Re: Re: WSPR on 137 kHz
>
>
> > Hi Andrey, Clemens and LF,
> >
> > thanks for the reports and info.
> > It is interesting to discover that long-range reception at very low power!
> > I only use the drive without the power amplifier stage.
> > Also this evening I will run WSPR beacon, QRG 137.650 kHz (Dial 136.150
> > kHz). Power is the same as yesterday about 50 mW erp.
> > Grateful for all the reports which may be reported on,
> >
> > www.sm6bhz.com
> >
> > 73 de Gus SM6BHZ
> >
> >
> > ----- Original Message ----- 
> > From: "Andrey rn3agc" <rn3agc@mail.ru>
> > To: <rsgb_lf_group@blacksheep.org>
> > Sent: Saturday, December 05, 2009 10:45 AM
> > Subject: LF: Re: WSPR on 137 kHz
> >
> >
> > > Hello Gus, Clemens, LF,
> > >
> > > 0008   -28  0.9   0.137650  SM6BHZ JO57 17
> > > 0024   -28  0.9   0.137650  SM6BHZ JO57 17
> > > 0028   -28  0.9   0.137650  SM6BHZ JO57 17
> > >
> > > I used WSPR 2.0.
> > > Dial 135.620, Rx BFO 2030 Hz - it really works.
> > >
> > > 73 Andrey
> > >
> > >
> > > Hi Clemens,
> > >
> > > thanks for your info and print my WSPR formerly of 137 kHz.
> > > Not bad considering the low power used!
> > > Luke just wants attention :-)
> > > I have now closed the transmitter for the night.
> > >
> > > Best 73 de Gus SM6BHZ
> > >  ----- Original Message ----- 
> > >  From: Clemens Paul
> > >  To: rsgb_lf_group@blacksheep.org
> > >  Sent: Saturday, December 05, 2009 2:17 AM
> > >  Subject: LF: Re: WSPR on 137 kHz
> > >
> > >
> > >  Hi GUs,
> > >
> > >  see below:
> > >
> > >  2118   8  0.4 136.151499  0 SM6BHZ JO57 17
> > >  2138   9  0.6 136.151500  0 SM6BHZ JO57 17
> > >  2144   8  0.7 136.151500  0 SM6BHZ JO57 17
> > >  2218   7  0.6 136.151500  0 SM6BHZ JO57 17
> > >  2222   8  0.7 136.151500  0 SM6BHZ JO57 17
> > >  2226   9  0.8 136.151500  0 SM6BHZ JO57 17
> > >
> > >  As my internert connection has been broken during the last hours no data
> > > upload
> > >  has taken place.
> > >  Probably a few loggings are missing because I had to use my dipole for
> > >  receiving whis is periodically disturbed when our heater is is on.
> > >  My K9AY has been turned down this late afternoon by our three months old
> > >  labrador 'Luke'.
> > >
> > >  73
> > >  Clemens
> > >  DL4RAJ
> > >
> > >
> > >
> > >
> > >
> > >  73
> > >  Clemens
> > >  DL4RAJ
> > >    ----- Original Message ----- 
> > >    From: Gus
> > >    To: rsgb_lf_group@blacksheep.org
> > >    Sent: Friday, December 04, 2009 4:55 PM
> > >    Subject: LF: WSPR on 137 kHz
> > >
> > >
> > >    Hello LF-group,
> > >
> > >    this evening i will transmit, WSPR on 137.650 kHz 136.150 kHz dial.
> > > Power abt 50 mW ERP.
> > >    Transmitter start at 16:00 GMT
> > >    All reports are welcome.
> > >    You can also log on,
> > >
> > >    www.sm6bhz.com
> > >
> > >    73 de Gus SM6BHZ
> > >
> > >
> > > ----------------------------------------------------------------------------
> > >
> > >
> > >
> > >    Eingehende eMail ist virenfrei.
> > >    Von AVG überprüft - www.avg.de
> > >    Version: 9.0.709 / Virendatenbank: 270.14.93/2544 - Ausgabedatum:
> > > 12/04/09 08:32:00
>
> --------------------------------------------------------------------------------
>
>
>
> Eingehende eMail ist virenfrei.
> Von AVG überprüft - www.avg.de
> Version: 9.0.709 / Virendatenbank: 270.14.95/2546 - Ausgabedatum: 12/05/09 
> 09:13:00

--------------------------------------------------------------------------------



Eingehende eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 9.0.709 / Virendatenbank: 270.14.95/2546 - Ausgabedatum: 12/05/09 
09:13:00