Ok John well that looks like a positive result , hihi, but nt63 is showing
at a much lower level - ( -10 Db at Gary) but the software is giving the
same levels .. i think its just the 128 tones used in mt63 that make the
signal look lower .. ive set the audio levels under the agc point .. so the
keying of each mode should not alter the level of the other
G ...
--------------------------------------------------
From: "John P-G" <[email protected]>
Sent: Wednesday, February 04, 2009 8:14 PM
To: <[email protected]>
Subject: Re: LF: If anyones about , MT63 x 500 Hz and Olivia 500 x 8
running now 1935 hrs
Hi Graham, LF,
I've got 2 copies of Multipsk running, as you described earlier, on
501.00 dial frequ.
I get the occasional "CQ" and "nbd" in the gibberish on the Olivia
version, and nothing at all on the MT63 version.
I have heard the odd "two tone warble" that marks the start of an
Olivia transmission very, very faintly, but no real sign of the FSK
during the actual message.
Let's see what the QSB does...
John
On Wed, 4 Feb 2009 20:06:00 -0000
"Graham" <[email protected]> wrote:
Hi John,
If you set up multipsk on the 2 streams may print from under the
noise .. its a follow on from the other night with Gary , where I
could not turn the power down low enough to stop mt63 from
printing .. less than 1 watt single tone .. just barely showing on
the waterfall ... but mt63 is supposed to be 10 db less effective
that mfsk .. that's a lot !
G ..
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date: 02/03/09
17:48:00
|
