Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: Re: Looking for 500 Khz xtal unit , any freq , inside 501 504

To: <[email protected]>
Subject: LF: Re: Re: Looking for 500 Khz xtal unit , any freq , inside 501 504 Khz ,
From: "Dave Brown" <[email protected]>
Date: Thu, 24 Jul 2008 09:33:32 +1200
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Use one of these
http://sharon.esrac.ele.tue.nl/mirrors/zl1bpu/micro/EXCITER/Index.htm
to generate half the output frequency and double that -you may even get by with feeding the ~250 kHz into the stage originally intended as the oscillator and running it as a doubler. Alternatively- use the exciter as is (it wont quite stretch to 500 kHz out - directly) and another xtal to mix it onto 500 kHz-that way you get to use all the exciter capabilities at 500 kHz without having to think about the effect of doubling everything. And since the exciter can operate anywhere from DC to 300 KHz or so you have a wide choice of mixing xtal frequencies.
73
Dave, ZL3FJ


----- Original Message ----- From: "Alan Melia" <[email protected]>
To: <[email protected]>
Sent: Thursday, July 24, 2008 9:05 AM
Subject: LF: Re: Looking for 500 Khz xtal unit , any freq , inside 501 504 Khz ,

Hi Graham 500khz crystals are quite difficult to make and certainly you wount fine one in a smaller package than HC6/U as far as I remember. There are some 10X series rocks that were used in one of the frequency calibrators (No 10 I think) They will need chasing up a little with some "scouring
powder". I think that is probably the best bet.....good luck finding
one...... I have one but its part of my crystal collection so not for sale
:-))

I have seen 453.xx kHz crystals in HC6/U but never come across any 500kHz. You could always put a 500kHz ceramic resonator inside an HC6/U case !!
Cheers de Alan G3NYK


----- Original Message -----
From: "Graham" <[email protected]>
To: <[email protected]>
Sent: Wednesday, July 23, 2008 9:14 PM
Subject: LF: Looking for 500 Khz xtal unit , any freq , inside 501 504 Khz ,

Looking for  500 Khz xtal unit , any freq ,  inside 501 504 Khz ,

Pref round 502 KHz , fundamental, needs to be a 'big' one , for a valve
oscillator  !

I assume hc6u would be ok or bigger , these look to be the right type !
http://hipme.com/weblogs/wa5znu/20050302210827/xtals.jpg

Tnx - G ..




No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.5.5/1569 - Release Date: 23/07/2008 13:31



<Prev in Thread] Current Thread [Next in Thread>