Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: RE: G3LDO 500kHz rig

To: <[email protected]>
Subject: RE: LF: RE: G3LDO 500kHz rig
From: "Ken Wright" <[email protected]>
Date: Sat, 1 Mar 2008 09:13:35 -0000
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=btinternet.com; h=Received:X-YMail-OSG:X-Yahoo-Newman-Property:From:To:References:Subject:Date:Message-ID:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Mailer:In-Reply-To:X-MimeOLE:Thread-Index; b=wiEmq8Xv57U7Tz9oCesADHweX9KYjPEWR2zv2YCv3KPFbCGZzLK8+dA2ez9PdgiE6VQ/nLZ7zHGQi+u9EqUdyVEIOOe4Buhs3E5+GkJ0CIdbCVVCNujJLM32VuDaUo4OZuTa+4F++GOP5Eko4oUkPbdr52E97EMhkq+xSV4Zp9s= ;
Domainkey-status: good (testing)
In-reply-to: <[email protected]>
References: <000001c87a63$13267ea0$8700a8c0@rtv5f9d8dfdf44> <[email protected]> <004901c87abb$636f7120$0301a8c0@g3kev> <[email protected]> <000901c87b17$0b094400$0201a8c0@ken> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: Ach7LdGU5MbtIZpnSiWhAlp52/3snQATpSuQ
Thank you Peter for the info.

Regards.
Ken   M0KHW

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Peter Dodd
Sent: 29 February 2008 23:52
To: [email protected]
Subject: Re: LF: RE: G3LDO 500kHz rig

Ken M0KHW wrote
> How many watts is the PL519 running?, I have some 807s I was thinking of
> using, but they like 750 volts on the anode.
>   
The PL509/519 is very rugged and will give far more power than an 807 at 
relatively low HT voltages.
I run my PL519 at around 80watts output although it is capable of a bit 
more without exceeding the anode dissipation.
The only downside is that the PL509/519 requires 40v for the heaters but 
I had a suitable transformer in one of my many junk boxes.

In 1998 LX1PD used a transmitter on 136kHz that used 16 PL36s in 
parallel. The PL36 was also a TV line TB valve.

regards

Peter, G3LDO



<Prev in Thread] Current Thread [Next in Thread>