Re: LF: Fabrication d'une lampe triode

To:	[email protected]
Subject:	Re: LF: Fabrication d'une lampe triode
From:	[email protected]
Date:	Mon, 14 Jan 2008 21:28:29 -0330 (NST)
In-reply-to:	<[email protected]>
References:	<000001c84faf$f02de5b0$0301a8c0@shack> <012201c85170$77787870$281d6a58@wgt01> <A174C7FC5E024BDCA283CD466675D17C@WarrenPC> <[email protected]>
Reply-to:	[email protected]
Sender:	[email protected]


Dear Group,

The frequency of the QRP LF beacon has moved from 189.9497 kHz
to about 184.005 kHz.  Both the aerial (0.95 to 1.00 mH) and
the inductance in the class E TX had to be tuned.

The beacon tranmits a 5 minute QRSS60 message every 15 minutes.

Any signal reports will be greatly appreciated.

73
Joe VO1NA

<Prev in Thread]	Current Thread	[Next in Thread>
Re: LF: Fabrication d'une lampe triode, (continued) Re: LF: Fabrication d'une lampe triode, Dick Rollema Re: LF: Fabrication d'une lampe triode, Marco IK1ODO -2 LF: Beacon WX, Andrey RN3AGC LF: WX 136.319.4 KHz, Andrey RN3AGC Re: LF: WX 136.319.4 KHz, uwe-jannsen LF: WX, Andrey RN3AGC Re: LF: WX, uwe-jannsen LF: RE: Fabrication d'une lampe triode, Michael Probert LF: Re: RE: Fabrication d'une lampe triode, J. B. Weazle McCreath Re: LF: Fabrication d'une lampe triode, Claudio Pozzi Re: LF: Fabrication d'une lampe triode, jcraig <= LF: VO1NA Beacon, John Andrews Re: LF: VO1NA Beacon, Jean-Pierre Méré Re: LF: VO1NA Beacon, jcraig Re: LF: VO1NA Beacon, Jean-Pierre Méré

Previous by Date:	Re: LF: Fabrication d'une lampe triode, Claudio Pozzi
Next by Date:	LF: dj8wx, Piotr Młynarski
Previous by Thread:	Re: LF: Fabrication d'une lampe triode, Claudio Pozzi
Next by Thread:	LF: VO1NA Beacon, John Andrews
Indexes:	[Date] [Thread] [Top] [All Lists]