Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: Re: Re: Olivia data test ,to night 503.300 ~ 20:00 hrs local

To: <[email protected]>
Subject: LF: Re: Re: Re: Olivia data test ,to night 503.300 ~ 20:00 hrs local > midnight
From: "Graham" <[email protected]>
Date: Mon, 15 Oct 2007 21:34:58 +0100
References: <002701c80f2d$c1087100$0964a8c0@gusham2mq8wmls> <001201c80f56$71513290$0e00000a@AGB> <005201c80f62$6caa4950$0e00000a@AGB> <00d501c80f66$65b794f0$63286a58@wgt01>
Reply-to: [email protected]
Sender: [email protected]

Ok Gary,

Thats the full 'tape ... can you reduce the rx signal, see when it stops printing ?

Tnx

G ..


----- Original Message ----- From: "Gary - G4WGT" <[email protected]>
To: <[email protected]>
Sent: Monday, October 15, 2007 9:03 PM
Subject: LF: Re: Re: Olivia data test ,to night 503.300 ~ 20:00 hrs local > midnight


Graham, LF,

Thanks for the help earlier, I have the hang of the software now.

test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq test g0nbd g0nbd g0nbd qsl [email protected] cqcqcq t

73

Gary - G4WGT - IO83qp

----- Original Message ----- From: "Graham" <[email protected]>
To: <[email protected]>
Sent: Monday, October 15, 2007 8:34 PM
Subject: LF: Re: Olivia data test ,to night 503.300 ~ 20:00 hrs local > midnight




The 'mpsk' function set is a bit over powering .. but ...

How to  set mode

Olivia  .... click on  the green button .. 'OLIVIA'

You will see at the top of the waterfall display , squelch slider .(set 0)... afc button .. then to the right .. cluster of 8 buttons 4-250 4-500 etc ....

click on , lower left button marked 250-8 .(sets mode to 250 hz bw @ tones 8)

tune as normal ... if signal is very low , switch 'afc and lock' off to stop wandering caused by noise

G ..





----- Original Message ----- From: Graham
 To: [email protected]
 Sent: Monday, October 15, 2007 7:08 PM
Subject: LF: Olivia data test ,to night 503.300 ~ 20:00 hrs local > midnight


 Hi,all.

 To date , not tried a multi tone data system .

The Olivia system , would seem to print well into the noise ..may out perform psk31

The 'multipsk' software has a 250 x 8 tone setting 250 hz/bw 8 tone freq , I shall set the 'purple' center freq marker , to 503.3 dead (+/- few c/s) . the output spectrum looks quite clean , and should not spread .

There are wider versions , but 250 should be 'ok' --- If anyone is xtal fixed , plse let me know and i can qsy

 >>>> Sorry to  those who 'know' , follows  notes on reception <<<<<<

As its possible , from observation at 'HF' olivia will print from below the noise level , accuate rx seting may be neede ,

rx settings 'usb' - dial frequency to give recovered audio center frequency to that of the transmission and software settings

i.e. The tx settings will be -dial frequency - 502.000 Khz , mode usb .. software tx/rx tone , center frequency, 1,300 Hz , giving 503.3 'carrier'

The reverse applies for 'rx' dial 502 , usb , software , -purple mark- 1300 Hz

using a narrow filter should not be needed as the soundcard/software will provide the slectivity, also narrow filtering may 'round' the pulses and reduce the s/n at the rx .



NB .. The new 'digital master 780' also supports the mode, but dosent appeare to support the '250x8' narrow version .. other packages may do.

 Software can be downloaded from :-

 http://f6cte.free.fr/index_anglais.htm

 select :-


  MULTIPSK.ZIP (Multipsk + Clock)


 Tnx

 Graham

 G0NBD

 io83lk









------------------------------------------------------------------------------


 No virus found in this incoming message.
 Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.14.11/1071 - Release Date: 10/15/2007 06:48





--
No virus found in this incoming message.
Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.14.11/1071 - Release Date: 10/15/2007 06:48






<Prev in Thread] Current Thread [Next in Thread>