Hello Mike,
Thanks for the info - the trick works on the TS-690 too, but the RIT range is
only +/- 1.1 kHz. So my "sensitive" RX range ends at 501.1 kHz. Mal was some
900 Hertz higher .
I'll build a selective preamplifier for this band soon, to give the deaf RX
what it needs ;-)
73,
Wolf DL4YHF .
----- original Nachricht --------
Betreff: Re: LF: QAP 500...how to get rid of attenuator on rigs...
Gesendet: Sa 03 Mär 2007 20:34:38 CET
Von: "MIKE REID"<[email protected]>
Wolf, Try setting the rig to 499.99kc and use the RIT to go up into the 501kc
band. No more attenuator!!! That’s what we do on 505-510kc here in the US.
MikeWE0HWD2XSH/16 From: Wolf dl4yhf
Hi Mal,
Armchair copy here in northwestern DL at the moment. The old TS-690 switches on
an attenuator above 500 kHz (like the TS-850), so no meaningful S-meter
reading is possible.
I am calling on 136.8 kHz to give you a "crossband-report".
Dave YXM not heard with my poor RX-setup yet.
Cheers,
Wolf DL4YHF (DK4U at the moment).
From: Mal g3kev
> Hi all
> As well as transmitting I am listening all the time for any acty on cw. I
> tune the band after every CQ also. If anyone needs a test pse leave a msg
> here.
> 73 Mal/G3KEV/IO94SH
--- original Nachricht Ende ----
"Jetzt Handykosten senken mit klarmobil - 14 Ct./Min.! Hier klicken"
http://www.klarmobil.de/index.html?pid=73025
|
