Hi Wolf,
I run a TS-930. It has a 9.9kc RIT which seems quite a bit to me but covers
our US band pretty well. Take out the MF attenuator if you have a schematic
handy. Kenwood usually puts in 3 resistors, 150 ohm & two 33 ohm resistors
in the 500-1600kc receiver input filter. Real easy to find on the
schematic.
Mike
WE0H
From: dl4yhf
Hello Mike,
Thanks for the info - the trick works on the
TS-690 too, but the RIT range is only +/- 1.1 kHz. So my "sensitive" RX range
ends at 501.1 kHz. Mal was some 900 Hertz higher .
I'll build a
selective preamplifier for this band soon, to give the deaf RX what it needs
;-)
73,
Wolf DL4YHF
|
|
