Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: antenna calculation..help needed

To: <[email protected]>
Subject: LF: Re: antenna calculation..help needed
From: "Alan Melia" <[email protected]>
Date: Thu, 14 Sep 2006 00:46:22 +0100
Delivered-to: [email protected]
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=btinternet.com; h=Received:Message-ID:From:To:References:Subject:Date:MIME-Version:Content-Type:Content-Transfer-Encoding:X-Priority:X-MSMail-Priority:X-Mailer:X-MimeOLE; b=X97E1K7dP2TvsZZ1S2/C9AvUdQJr+mrzaIxixHZ9/MBeFWqvZucr1HbVq7PecK3ntF6+vcckyalR0VAbmO5G0WpiZeusT76Ye85dTwqgjJngpp1ct0LC8L1mXFSuyhCerjW9fAHxKjZLyi96zF2b+H8ndOZ0oW8LdpEaydHFQ/c= ;
Domainkey-status: bad (test mode)
References: <000801c6d757$0c6af2e0$60be3b3e@fujitsu>
Reply-to: [email protected]
Sender: [email protected]
Dick,
You could use a quarter wave length of 75 ohm coax in series from the base,
as a matching transformer....allowing for velocity factor of course
Cheers de Alan G3NYK

----- Original Message -----
From: Dick <[email protected]>
To: <[email protected]>
Sent: 13 September 2006 18:06
Subject: LF: antenna calculation..help needed


Hello all,

It's off topic, but as I can't find it on the net I'll ask it here.

I want to modify an old 27MHz CB antenna to an quarter wave vertical for 30m
(10.14MHz)

Diameter is tapering from 26 to 15mm.

Question: what length should it have? I suppose 0.25 wavelength x 0.96 or
so...

Sofar not a big problem, but as I will use 36 radials direct on the ground,
it's radiation resitance will be
around 36Ohm.

To match this to 50Ohm I can use a series capacitor, but what value this
should be??

Who can tell me?

73

Dick, pa4vhf



<Prev in Thread] Current Thread [Next in Thread>