Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: SAQ Rx

To: [email protected]
Subject: RE: LF: SAQ Rx
From: "Gary - G4WGT" <[email protected]>
Date: Sun, 19 Feb 2006 11:44:48 -0000
Delivery-date: Sun, 19 Feb 2006 11:46:14 +0000
Envelope-to: [email protected]
Importance: Normal
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Nigel,
 
Try to get the Mini-Whip outside the building & well away if you can, you should get reduced local noise pickup from house wiring etc. I found that a small change in position can make a big difference.

Regards,

Gary - G4WGT - IO83qp

Web : http://myweb.tiscali.co.uk/wgtaylor

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of [email protected]
Sent: 19 February 2006 11:04
To: [email protected]
Subject: Re: LF: SAQ Rx

In a message dated 19/02/2006 10:50:46 GMT Standard Time, [email protected] writes:

I tuned the G3LNP loop to 17.2KHz to receive & compared it with the
Mini-Whip & could barely hear SAQ on the Mini-Whip due to local noise, I was
able to rotate the loop for best results, pleased I went to the trouble of
tuning the loop.
25 miles north of London, with a mini whip mounted inside the apex of a single story cottage's slate roof -- about 5 metres agl, signals were just about readable on an Icom R70 and WR313i.
Local noise was the biggest problem here too.
My LF loops are packed pending relocation so didn't have anything else available to compare it with.
I'm now praying it doesn't rain before the 1300 schedule as about to elevate the whip through a loft window and see if that does any better:-)
 
regards
 
Nigel
G8PZR
 
 
<Prev in Thread] Current Thread [Next in Thread>